Viewing all customer Discussions for:

39-227B T-Crank Handle, 3/8" Spline for Pella

I will likely need both left and right versions I am fairly handy and watch a video so I know I would need to remove trim to change. Have several windows that will need replacement - some are double (side by side) some are single. They are also different sizes but style looks the same - would they ... (cont.)

Hello We'd like to replace these Pella casement window cranks with folding ones. These have always interfered with our blinds. Is this possible? The window is from early 1990s.

I need a replacement crank handle for an older Pella casement window. The original handle broke. I have attached photos of the original handle, spline hub, operator arms, and an identical working handle from another window. Please identify the correct replacement part.

I have a problem at the moment of closing the window almost at the end of the closing proses and set the lock position inside. To be able to close the window, we have to push window from outside and then lock the window.

Please let me know how can I replace the handle opener for this casement. I don't want the original handle that sticks out. Any recommendations of which I can replace it with. Thank you in advance for your services. Nina

I had a new faucet installed and can't open the casement window with the Pella crank as it can't clear the faucet. Is there a short crank or key that I can purchase?

Please let me know what handles I need for this window crank. The only number I find on it is 708 wc.

We are renovating our kitchen and keeping the original Pella windows; still in great shape. I am looking to replace several of the casement window crank handles. Photo of crank is on graph paper with 1" increments. Any help appreciated.

Hi!! My house was built in the 80s. I don't see part # but it says Anderson on it.

I need 5 left-opening and 4 right-opening sets! They could not find any markings, numbers, or names...

I want to replace the lever lock handles, but the screw holding each in is stripped or covered in paint. I do not know how to remove the cover for the crank mechanism, and there is no screw holding the T-handle on. Windows and cranks work beautifully.

Hi, looking for a repalcement latch for an crank out window.

Windows blow open/ closed when partially open. Loose, worn mechanisms. No identification numbers on casement windows or mechanisms.

I'm looking to replace this with a foldable crank handle. Also need new operators for similar windows. These are ~30yo Pella's. Thanks

I am looking to switch out to a t crank style. Hand crank is 3/8 x429

Hi - looking to replace a number of Pella cranks with a code number of X429 and 7138 (could be 7136) on the inside. I tried the 39-227B t-cranks, which is what we want, but they aren't long enough to completely slide down the spline. Is there any other part that would work for this that isn't a cra ... (cont.)

I need to replace a 30 year old Pella window crank with a folding window crank so that blinds will fit on the window. The existing crank handle has a "X428" at the bottom of the existing crank. Thank you

Unsure which T Handle to order. My best guess is 39-108 Jalousie T Handle 3/8", but 39-298 (Tee Type Crank Handle, Fits Andersen) and 39-227B (T-Crank Handle 3/8" Spline for Pella) also look similar. Thoughts? Thanks!

Hello, I'd like to swap out the larger crank in first photo for smaller crank in second. I need 3 more smaller cranks. Do you have these ?