Viewing all customer Discussions for:

39-227B T-Crank Handle, 3/8" Spline for Pella

I am looking for a folding handle to replace my old Pella handle. I've attached a photo of the old handle. Can you help me?

We have 2 windows made in 1970 and also have windows made by Pella with crankhandle after 1990.The difference is the inside—hole size of 7/16 inch—slightly bigger than 3/8 inch hole in models after 1990. 1009 and 1011 are photos of 1970 crank handles and 1012/1013 are from 1993 windows with crank ... (cont.)

We have the original Pella windows in our home, circa 1975, and would like to replace the clumsy cranks with the T-crank handle with 3/8" spline. Will they fit snugly and operate correctly? We have tried unsuccessfully to get "universal" replacement cranks - they don't fit properly and don't grad ... (cont.)

Hi! I have several casement pella windows that use cranks to open the windows however they are too large for the sills and interfere with window treatments. Would the "t-cranks" that you have for pella be a suitable replacement? Unfortunately, I am not sure how to tell what model the windows are, is ... (cont.)

looking for one handle fold away for a window; is a swing one left side pella brand when you reply i will send you the description via picture, its only one crank handle to substitute a broken one. or i am gonna need to buy another kit. thanks

I have Pella casement windows installed in my house, about 20 years ago. I am having shutters installed, and the hand crank will hit the shutter when cranked. Is there a solution or foldable crank-handle to fit on the exsisting mech

Hello. I purchased 10 bronze 39-227B cranks a few weeks ago. I need 20 more. Are they no longer available in bronze? Thanks!

I am putting in blinds and need to replace my crank handles with t-crank handles. On the inside of the handles in the picture it says 7138 and X429. I was wondering if 39-227B would fit. Also I need to replace one of the actual cranks and was wondering if 39-097 would fit. Thanks. ... (cont.)

I need handles to fit Pella casement windows. The number on the Pella handle 5801-408This is a short handle and it fits the spline. I would perfer a longer handle. Will your 39-109B work?

Will the insert connector provide a 1" extension for my folding handle that rubs the wooden sash when cranked? This is a Pella casement window installed too low into the sash.

I am looking for a couple of T handles with will fit current style Pella casements. A couple need to have a satin nickel finish, and a couple need to have oil rubbed bronze finish. I am a sales rep that works for the NJ Pella distributo.

Which T-handle will fit the 39-002 and 39-001 operators?

I have a crank handle similar to one of your 39-109B for Pella. 3/8" spline, 7/8" across, 4 inches (not 4 3/16) side to side, 2 3/4 (not 2 1/2) inches middle of spline to bottom, set screw on the bottom. Will your 39-109B work as a replacement? Thank you!

Does the 39-102 handle fit Pella Casement Windows?

Is the 39-104 crank correct for Pella casement window?

My Pella handle has 11 teeth (spline) does the 39-227B t-handle have the same number of splines?

Does this unit use a set screw? I am looking for a crank in white, approx 7/16 diameter hole (spline?)that does NOT use a set screw. I know some of these just snap on, eliminating the old problem of set screw-caused damage.