Viewing all customer Discussions for:

39-268 Wood Casement Window Operator

Looking for something that will operate these old (1950's) awning windows. Hinges are exterior and there is no internal hardware, only what you see. I bought a couple of 39-268 hoping they will work. What do you think?

This is a small window. I am not sure of the length of the mechanism. I would guess 10-12" ??

Casement Windsor operator needed

Hi, I have old manually operated wooden windows. I would like to add a complete set of new, casement hardware. Do you sell a complete kit, or do I have to buy all the necessary pieces separately? Do you recommend a single arm, or dual arm? When I attach any such system to my window, d ... (cont.)

I purchased 39-268 and installed them on our church windows. Attached are 2 photos of how I installed one. When the windows are cranked in, the arm of the crank hits the sash. Can you tell what I did wrong from these pictures? Do I have the wrong the wrong hardware or is there an obvious installati ... (cont.)

We have 5 windows with this type of crank out window in the home we just purchased. We haven't had any luck finding replacement handles. Any help you can provide is appreciated.

Would you carry this window crank and the bars from window to inside. The piece that is on my window sill is stripped and when I put in the crank, it will not crank out. I could use the cranks also.

Hi, I am looking for some of these to replace some broken in my house. Can you help, or direct me someplace? Thank you very much. Ives Casement Window Operator, Heavy Duty, 1950 c. David

I bought a home built in 1906 and the sleeping porch has Rixon casement mechanisms. I need 1 or 2 replacements for windows we are rebuilding. Hope you can tell me where to find them. Thanks, Mike

Can you suggest a similar replacement operator for *through the screen* wood casement window operation? This one is probably from the 1940's. It is a circa 1930 home, I am looking for old school replacement operators - they must work through the screen. Thank you!

Can you please let me know if you carry something similar to this

I am not sure what crank to use for these windows. The handles(cranks) have been missing for a long time. This is a rental home. I'll send you a picture and matbe you can help and advise. Thanks, Gary

I am looking for replacement hardware for my casement windows. My home was built in 1939 and believe the hardware is original to the home. I want to replace the hardware on all the windows so it doesn't have to be an exact match, but I would like it as close as possible. The current hardware has a r ... (cont.)

The crank handle im looking for is as the added picture shows, the measurements are 5-1/2L X 5/16W. I have found many with 1/4 width which is too small for my window. If you could help me find some of these I would be very appreciative. Thank you

I am trying to see if this hardware comes with a top hinge or not. thank you for your response

Do you think you could identify this? Are operators like this still in production?

As shown I think the 39-268 handle is too short to clear my window casing. Does the handle come in different lengths? I need a 2 foot handle. Thanks

Yes, the 39-268 crank handle is removable from the window operator body.