Viewing all customer Discussions for:

55-106 Weather-stripping, 3' length

see measurements in photo added I am looking for replacement

This is the weatherstripping from the sides and bottom of a casement window (Norco wooden windows). The dimension is approximately 7/8" long.

Hi all - older Caradco windows. Vinyl weather strip; might be your "leaf" type strip? I can measure too if that helps - but I'm guessing y'all will take one look at the pics and instantly recognize it. Thank you!!

Need help with old caradco casement window sash seals.

We are looking to identify and replace the weather stripping on two Anderson permit shield casement windows approximately 45 in tall 22 in wide The code for the operating handle that fits this window is 39-095

Hi, I have a crank out window that was made by a Company called Outlook. We built the house in 2001. The top drip edge of the window has become brittle and chipped off. It appears to be an extruded part. Please see attached pics. Do you sell a replacement part? Also, it appears that the sl ... (cont.)

This a window part I can't find is for a windows awning weather strips the dimensions are ... 1/8 5/8 1/4. 1/8 the brand of the windows is, CaradcoThanks so much for your help

Trying to confirm exact part

I have 4 Eagle casement widows I need new seals for. I will send pictures

Hello. I am also looking to replace weatherstripping on some double hung M&W windows -- which were also installed in the late 1980s. Below are pictures. Any recommendations for replacement weatherstripping? Thank you.

We have 12 casement windows which are 11 years old made by Certainteed. The company is no longer in business. They measure 22.5 inches by 58 inches along the outer edge. We are fairly handy, but we are not seeing an obvious way to replace the weather stripping. So, our questions are: 1) ... (cont.)

My living room has 2 awning windows that have kerfs in their window frame (both sides and along the bottom edge, the top does not have a kerf). The weather stripping has been coming out of the kerfs and become damaged. The stripping has a very thin (plastic? vinyl?) flap extending out of the kerf po ... (cont.)

These are the measurements for a weatherstrip I removed from our casement windows. It was a flexible vinyl but is now sunbaked. It has become so brittle that I cannot remove a piece intact, I have made the measurements in the photo, and I believe they are accurate. This weatherstrip is from Caradco ... (cont.)

This Andersen casement window is circa 1974 - 1977. Any idea what this window seal is?

hi I just bought a new house and all the old weatherstripping around the casements windows is no good. I have no idea what type of windows min 30 years old casement wood windows the weather stripping is 1/8 x 1/4 x 3/8 need to order a lot thanx

Norco wood casement windows from 1984. I need to replace the vinyl glazing bead that slots into a channel Lon the edges of the sashesThe width is 1/2" and the length is 1/4"

Hi, I have a wooden Norco casement window that the rain seals are brittle and need to be replaced I enclosed the photos and hope you have or can steer in the right directions for replacements. I have two windows that need new seals. Hope to hear from you in my quest. Thank you

Hi, I'm looking on your website and I can't correct identity what seal or glazing strip I need. Here is a few pictures of the seal and the window track.

I am looking for replacement weatherseal that came out of a caradco casement windows installed in 1992. Measures 1/2 inch wide. The side that inserts into the window slot is 3/16 to 1/4 inch deep.

Hi, I am trying to find these plastic weatherstrip/gaskets that fit into the bottom of my tilt from the top basement foundation windows. The first picture is of the removed gasket, the second two show how they are installed into the window frame. The final picture is also an end view of the gasket t ... (cont.)