Viewing all customer Discussions for:

55-106 Weather-stripping, 3' length

There are two different seals used on my casement windows. The second 2 photos show what I assume is some type of leaf seal. The dimensions are 9/16" by 1/4" and is made out of a plastic material. The other seal in the first photo is overall height of 1/2", bottom and center cross section are each 1 ... (cont.)

This seal slides into older slider windows. They're 3' long pieces and three sections per complete window. Thank you

Refurbishing my 43 year old Truth windows. The house was built in 1980 and I assume they are the original windows. I would like to replace the weather seal as it has disintegrated on most of the sashes. The attached pictures show that it is about 3/4 of an inch with a 1/4 deep kerf thingy (my tech ... (cont.)

My house has 2 window manufactures that use this window weatherstripping. It looks the same for both manufacturers. One window is "Eagle maximiser plus I GCC CBA IGMAC CIG-3 2-99" whatever that means. Do you sell this?

Install date 2000. Is there an equivalent?

Looking for replacement weather stripping for caradco casement windows.

Weather stripping for casement windows. Sent 2 pictures of the profile and dimensions of the weather stripping.1 picture of the casement window with the weather stripping in place. The insert groove is a .080" depth and .334" width. The weather stripping is a rigid vinyl plastic. Which products woul ... (cont.)

Hi! Our 20 Caradco replacement windows are 25 or so years old and now require full weather stripping replacement. The windows measure approximately 24"x 56".Can you help with this project?Ron

The weather seal shown is from a wooden Pozzi casement window circa 1980. Dimension of side with return that fits into a slot in the wood frame is just over 1/4". The dimension of the bottom , sealing portion, is 7/16". It is a plastic material that has become brittle over the years. Can you pro ... (cont.)

I'm looking for the right and left side weather stripping for earlier model Andersen basement windows. Please see attached photos. Thank you

I need to replace the kerf mounted "leaf seals" in my ROW brand windows. Seals are mounted in the upper sash of the double hung windows. Windows were purchased and installed in 1978 and seals have become brittle over the years. Photos are attached for your review. I need to replace 13 pieces measuri ... (cont.)

I'm trying to find a replacement for WENCO casement window weatherstripping shown in the photo. These are early 1990's windows (maybe JX7 model). The dimensions are appproximately 1/4x1/2 in. Bob

Hi, I am looking for replacement parts for a Pella six ft. sliding storm door. The parts in question, one on top & two on bottom of door. All three are pressed into a slot in the door. Also there is a rubber gasket we're the two doors meet. See pictures below, can you help me. If they are no lon ... (cont.)

I am looking for glazing bead. please see the attached photo

Do you sell this type of weatherstripping for wood casement windows. The window were installed around 1983. What is the name or style of this weatherstripping? Thanks

To whom it may concern: We have 4 of those old metal frame windows which all the weather strips need be replaced. I took some of the old strips down and took some pictures as below, total 5 kinds *** #5 looks like window stopper piece Would you help us to identify those parts? Your time and eff ... (cont.)

Older wooden Norco Windows. I need to purchase quite a few strips if you have them available. Thank youRon

I need enough material to reglaze two 54"x20" panel casement swing out windows. The house is 25 years old. The profile is attached with marked measurement of 1/4" by 1/2". Color is light grey but crème or white will work.

Please help me identify this plastic weather stripping for wood sliding door beige color. hard vinyl material

Looking to replace weather stripping on CARADCO casement windows installed in 2003. I have already done cranks and while doing that noticed substantial deterioration of the weather stripping.