Viewing all customer Discussions for:

55-106 Weather-stripping, 3' length

Aging aluminum windows with deteriorating flexible rubberized slide in glazing gasket. The same gasket material on all four sides of window panes. Jalousie window style. Three panes per 50" x 48" window.

I've restored 35 old Brosco windows on a 1805 house, and I need replacement weatherstripping for all sash. I believe that your 55-106 will suffice in 30 inch lengths; white; rigid. Please cross-reference my photos with your products. What is the cost and availability for 105 weatherstrips (35 win ... (cont.)

Marvin wood casement windows installed about 1970. It is my understanding the weather stripping has been updated for Marvin. May I have the cost for 10 feet of V 195 leaf type upgrade. It is my understanding that this would fit the Marvin window sash. 10 feet of V 138 which I am told woul ... (cont.)

Help I need to find these two window seals for my home.

I'm looking for upper and lower weatherseals for 14 custom glazed windows from mid 1980's. Probably they are Marvin or Andersen. They are marked 24P on track and say 9000/9500 series on a label. I am attacking a sketch with dimensions and shape and images of both upper and lower seals Let me ... (cont.)

Trying to identify and order these seals from widows. The works on the windows were made by Truth. the house was built 27 years ago--these seal comes from windows on an addition built 22-25 or so years ago.

Hello, We have a couple of Marvin sliders. They are called Wood Safe-T-Plus patio doors. They are 8/0 doors. The weather stripping on them has failed. Both the jam strip and the seal between the stationary unit and the actual slider. Would you have these available? I have pictures if that would ... (cont.)

Do you have a replacement for Marvin sash window dual seal weather strip for the meeting rail? Attached Adobe PDF file contains the cross-section diagram with dimensions of the weather strip.

Hello I have attached a picture with the dimensions of the weather strip that is located on the bottom interior of the top sash of my double hung Norco windows. I would like to know if you carry a replacement strip for this window. Thank You Don

This is from a wooden,single pane, double hung window circa 1978. It is a metal air seal between the horizontal portions of the windows where they meet. It slides into a kerf or slot on the upper window. It is 1/4 by 3/8 by 1/8. Both edges are turned under/folded over by 1/8. Do you have one of thes ... (cont.)

I am looking to replace the weather stripping on my Crestline windows that were manufactured in 1994, having trouble finding the exact weather stripping needed. Can you assist? Jeff

I have about 35 wooden Marvin casement windows that need replacement weatherstripping. I have some old replacement parts labeled V673 but they are too brittle to use. The sash dimensions are 45" x 18". I'd like white weatherstripping. Can you help?

The dimensions are on the attached jpeg. No names, markings or numbers found.

These are photos of the Marvin weather stripping used on the Marvin windows in our house. The windows were likely installed in the early 1970s. In looking at your internet site it appears that they are the same as your Product Code. 55-106. HOwever before making the purchase, I wanted to confir ... (cont.)

The weather strips on my Kolbe windows need replacing. Do you have the replacement strips? Pictures attached. As I have indicated on a picture... There is a rigid plastic 'T'; the base of which is pressed into a groove in the window. There are two soft rubber wipers that extend from the top of the ... (cont.)

the part i'm looking for is a weather seal that slides in a channel on the lower edge of a vinyl replacement window - it appears to be a semi rigid rubber or plastic, sits at the outside edge of the sash, silhouette is round with a small lip at the bottom, like a Q.

I need to replace all of the stripping (or most anyway). It appears to be what is described as a "leaf" style. I appears to be the 55-106 style but I'd like to verify before ordering. Any body out there that can help? Thanks.

This is a cross-section of weather striping on a vinyl casement window. It is kerf set. the kerf edge approximates 1/4 inch long and 1/16 thick. Half round "bubble" is 1/4 inch wide, 1/8 inch high. the "wing" is approx 3/8 in length. I know you may not have an exact match but do you have some ... (cont.)

Hi, I hoping that you can help me find replacement weather stripping for my Pozzi wood casement window and window frame. I am a DYI that usually learns by trial and error Thanks, Amy

I need replacement weather stripping for my Marvin windows. Can you help me what to buy?