Viewing all customer Discussions for:

58-008 Prime Door Seal Set

Hi. We need the following items: 1. Sweeps for the master and slave. See edge profile pic attached. The master is 35.75" wide. The slave is the same 35.75" wide plus a .75" trim piece [which houses the astragal], so the slave becomes 36.5" wide. 2. All weather-stripping to include: A. One piec ... (cont.)

I'm having great trouble finding wide kerf seals for my doors they are older pease brand metal frame and doors and the kerf is approximately 1/4" (photo included) all i can find online and in stores is for a narrow kerf thank you

The picture (excuse the spiderwebs) shows the upper lock side corner of the door. The vertical magnetic weatherstrip has been removed as it has failed. The upper strip is in place. As you can see this is different because the kerf is outside of the door and the weatherstrip wraps around and into ... (cont.)

Looking for a replacement. have several 8 foot doors.

I'm looking for replacement weather stripping similar to the above photos. Two 80" pieces (sides) and one 32" piece (Top). Not sure who the manufacturer of the door is. Or, how old it may be. Thanks, Paul

weather strip on the door jamb

Raj

This is the profile of the weatherstripping, I am trying to replace, it is on the sides and top of my 8' x 3' door frame. It appears bronze or black in color. Suggestions ?

I called and they asked me to send pictures. Weatherstripping for a storm door circa 1990. Glass says guardian Need the side for latch. Probably about 7 feet. I saw a picture of the swisco 58--008. If I cut off the kerf and trim the t part down to 3/16 it slides in snugly.

I need to replace the sill weatherstrip in two 20 year old Vetter doors.

The standard foam strips sold at big box stores don't allow the door to close or seat properly.The door probably is 15 to 20 years old and the weather stripping appears rubbery or vinyl and hollow.If you carry anything like this,then i would be interested in the cost.Thanks,Rich

Need this gasket identified.

Hello! I have a double-door entryway that is 96" tall and 72" wide. I am having a very hard time finding 96" kerf-mounted hinge-side compression weatherstripping that is similar to the image I have attached. I'm pretty sure that the strips that are in the 58-008 kits are produced on rolls an ... (cont.)

Need to identify this weatherstripping it has a flange that overlays the frame to fasten it. Any help would be greatly appreciated.

I'm looking to replace the beige or almond magnetic weather-strip the goes on a steel door. Do you have anything I could use to replace it?

I have a 30 year old Stanley door and I need 1pc 89"lg for the lock side. I will send you a photo and I hope you have one. Bad puppy did it!

Can't find magnetic door seal kit for steel door. No markings on door or old weather stripping.

Require weather stripping for a Stanley 32" steel exterior door made back in the 80's. Picture is provided. Also require the bottom weather stripping for the sill plate. We would like 3 new silver door hinges also if available. Thank you

Replacing the two types of weatherstripping used on a Stanley "Sta-Tru" exterior door. I've attached a profile of both and the door ID label (if that's of any use). Please note the one weatherstripping has a magnetic material. Thanks!

weather stripping on metal garage door into house. Installed in 1988 / 89 Stanley door