Viewing all customer Discussions for:

58-053 25ft Kerf Mount Bubble Seal, 5/16"

Pella windows. Needing replace the gasket/seal per the pics Thanks

Hi! I would like to replace these two parts. MFR code HRW-1 Thanks for your help. Sue

I'm looking for a part for a window ? these are window seals that fit into the lower part of the upper window in a 2-window arrangement. See the picture below. The seal fits into a slot in the wood frame in the upper window. The problem: The installer painted the metal plate, which is on the ... (cont.)

I would like to replace with new ones. See attached pictures. The house was built in 1990 so I assume the original parts are from around that time. Also I would like to replace the cover and crank handle with new white ones. Which parts do I need to buy? Can you send me the parts list for the full s ... (cont.)

It has been very hard to find replacements for this pile weatherstripping. We don't mind replacing it with something else that would serve the same purpose, but would love to keep air from coming in the between part of the sliding door. Thanks for your help!

I am looking for a replacement weather seal for my Pella door. Seems like it is just a bubble seal but wasn't sure what the appropriate seal is.

The part needed is attached to all edges of the sash ( not frame)

31x77inch ancient sliding wood patio doors. There are eight doors in total or four pairs.

Can you please helpme out? If you stock this type of seal I need to purchase some.

I am looking for this weatherstrip . Photos attached . From Milgard Windows Sticker from old Milgard Packaging says .556 x .250 Bulb Seal I am looking to buy a Large quantity. I could really use it in white.

Seal for the bottom of my window. Not sure what would be the best replacement. Thank you.

Hello, I'm trying to rebuild some mid 1980s Jeld wen windows and I'm looking for a source for the pieces in the windows. Do you have any of these parts? Thanks.

B19190X27B2 on the inside of the window no other numbers

How soft is the kerf part? Is it difficult to push kerf into window groove? Do you recommend using any installation tool that will not tear or cut the bubble seal?

Help...Dave

I have NORCO double-hung windows that are about 1995 vintage. The following is etched in the inside seal of the double glass windows:1GCC CBA 94-3 3/4I am looking to replace the weatherstrip on the windows shown in the pictures attached. There are quite a few windows. Do you sell in rolls?Can you ... (cont.)

House built in 1964. Original windows. Bulb diameter: 0.25 Base extension: 0.1875 Do you have a seal that will work? thanks.

kerf height is 1/4 in. Total height is 5/8-in. some of my windows do not close all the way so I need something similar to this but taller. possibly a 7/8 in. or whatever you recommend.

Trying to source replacement vinyl leaf seals and bulb kerf weatherstrip seals for Pozzi wood casement windows installed 1986. Add to that a set of 10 inch Concealed Casement hinges, Truth 30744. Photos of each are attached. Thank you.

Casement windows were manufactured by Paramount Windows in Canada, now out of business. Need about 300'. 3/16" pile height would be fine as well. Nothing over 1/4" however.