Viewing all customer Discussions for:

58-053 25ft Kerf Mount Bubble Seal, 5/16"

Help...Dave

I have NORCO double-hung windows that are about 1995 vintage. The following is etched in the inside seal of the double glass windows:1GCC CBA 94-3 3/4I am looking to replace the weatherstrip on the windows shown in the pictures attached. There are quite a few windows. Do you sell in rolls?Can you ... (cont.)

House built in 1964. Original windows. Bulb diameter: 0.25 Base extension: 0.1875 Do you have a seal that will work? thanks.

kerf height is 1/4 in. Total height is 5/8-in. some of my windows do not close all the way so I need something similar to this but taller. possibly a 7/8 in. or whatever you recommend.

Trying to source replacement vinyl leaf seals and bulb kerf weatherstrip seals for Pozzi wood casement windows installed 1986. Add to that a set of 10 inch Concealed Casement hinges, Truth 30744. Photos of each are attached. Thank you.

Casement windows were manufactured by Paramount Windows in Canada, now out of business. Need about 300'. 3/16" pile height would be fine as well. Nothing over 1/4" however.

The pictures are the end view and measurement of the Bubble seal weatherstripping for the window. Additionally, I need to replace a piece of snap in glazing. Based upon appearance and measurements, this appears to match 55-062, except that the exiting parts are beige and your web site lists only w ... (cont.)

We recently purchased a house with single-hung, single-pane, Alenco aluminum windows that have no visible number and need to replace the white vinyl glazing beads, weatherstripping on the bottom sash, and some of the channel balances. In order to remove the sash, it appears a part above has to be un ... (cont.)

Please see pictures. One hollow bubble type, and one foam filled.

I am trying to replace weatherstripping on wood casement windows. I originally purchased it through Dixieline hardware but they don't carry it any longer. The original shipment I received indicated an Item number WE 949 BC and was described as "weatherstrip sash CSMT JWCU Lineal black". A Batch nu ... (cont.)

Hi. This is a weather strip for a crank out window we purchased from Wellington windows in Minnesota , now out of business.I hope the photos are helpful.Don

I have several older wooden double hung windows that need the bubbles seals replaced. I think the manufacturer is Crestline but I am not sure. I have attached a picture of one of the seals. Thanks for your help! Mark

Weather 1.jpg-guy brought this in and its labled top and bottom Weather 2.jpg-labled Window Sides Weather 3.jpg-Doors tops and sides

The seal slides into a slot on the bottom of the window frame. The windows are 22 years old so the seal has dry rotted on a lot of them or stuck to paint and ripped off. The same seal is also used on top window frame but they are in better shape than the bottom seals

I am looking for bottom sweep style weather stripping for our solid wood front doors - please see pictures attached. They are French style doors so I will need for both

This part is between the fixed and sliding doors of a sliding glass door set. I need about 10 feet. Thank you!

These are hard plastic, the base is about 3/8 inch diameter. These pieces are inserted into a groove in the middle of the bottom, sides, and top of the window. Thanks.

Good day,My windows started 'loosing" black plastic parts of the window. It looks like some sort of weatherstripping. You can see that the bottom part of the window still have that part, but the side one got broken. You can see just remaining part of it. I found out that company no longer in busines ... (cont.)

I need about 950'

My daughter recently bought a house in Buffalo, NY. The windows were replaced approximately 10 years ago by Sound Solutions in Chicago as part of Buffalo's Quieter House due to the proximity of closeness to the airport. The weather stripping is about 1/2 inch wide.Sound Solutions went out of busine ... (cont.)