Viewing all customer Discussions for:

58-053 25ft Kerf Mount Bubble Seal, 5/16"

Can you identify my wood door weather seal?? If you cannot,what do you have that might work!!! Dimensions: 3/8 “ round and the connecting part is 2/8” Thanks for your help, David

Hello, replacing my bubble seal and it looks like I should use something like 58-053 on sides and 58-055 angled on top and bottom to avoid hinge hardware. Is it ok to use the two in combination? I noticed the diameters are a bit different between them. Is there a difference in compression stiffness ... (cont.)

I thinkin the 58-055 might work for me. (Casement Windows) Instead of the V shape flap shown in my photo you have the bulb. Maybe the one without the angle seal would be better? The barb measurements are the same and the V flap, when open is 1/4" The base of the V flap attached to the barb i ... (cont.)

Hi there We are looking for some weatherstripping that looks your 58-053 but we need it a bit thicker. Do you know if this exists? Thank you, Kellie

Hi I need rubber bulb-style weatherstripping with a barb that fits into a kerf cut into the edges of wood window sashes. Please let me know if you can supply that for about 50 sashes. Thanks, Steve

Need to replace weatherstripping on several Kolbe & Kolbe double hung windows installed in 1985. Image #1 - I think is Part # 58-053 Image #2 - I think is Part # 58-055 Yes or No?

Hi, Was wondering how water tight the 58-053 bubble seal is or if the foam filled seal would be better for a casement window. Thanks Eldon

Hi All of the weather stripping seals on our Pozzi windows have failed. They are literally falling apart. They appear to be bubble seal with a kerf edge that attaches to the window frame. I believe the replacement seals will need to be nailed or tacked to the frame as one can't remove the old ... (cont.)

I need a bubble seal with a diameter of 11/16 or 3/4 of an inch and a base of 5/16 of an inch. Any suggestions? Thanks.

I have Jeld Wen/Pozzi windows which are about 17 years old. The outer window seal matches your bubble seal (58-053) with respect to tang design, tang height,and slot requirements. The bulb, however, is 1/4" diameter vs. 5/16". Has anyone used your product to replace the Jeld Wen seal? Do you thin ... (cont.)

I am looking for a bulb seal with a .200 diameter and a .225 push in. see attached pic

We have several Caradoo double windows measuring 40"x 48" with a third window (landscape orientation) underneath. They were put in about 20 years ago. I think your Leaf weatherseal will work but I am not sure about the grooves fitting. I have 3 images of the two types of weather seal taken from ... (cont.)

Do you have anything similar to this one? Thanks.

See photo. Please help identify name or worn part, where to get, how to replace. Thanks. Mary and John

Looking for replacemnt weatherstriping for Built Best Windows, installed in 1995.

Hi, I am looking for replacements for the 2 Kerf seals that run the perimeter of my mid 1990's Hurd casement windows. The offset foam filled bubble is the primary and the straight bubble is the inner seal. Can you please recommend replacements? Thanks Ryan

I have 20 year old LP brand wooden casement windows, on which I would like to change the weatherstripping. They appear to have a channel in the middle and flat or round white stripping Any ideas if something will fit

These CertainTeed windows were put in during the summer of 2001. The paper stickers on the edge of the windows are no longer legible. Thank you for your attention to my request for replacement bubble seal for these 4 windows. Each window takes approximately 10 ft x4 totaling 40 ft. Is this av ... (cont.)

Im in need of replacing some of this and cannot find it anywhere.The bubble measures between 1/4 to 5/16 and the overall height is bout 7/16.Can you help?

Looking for weather stripping for my Kolbe & Kolbe double hung sash windows. I have sent a photo of it for reference. Do you have this weatherstripping. Barb