Viewing all customer Discussions for:

58-053 25ft Kerf Mount Bubble Seal, 5/16"

I have ordered from you a crank operator & it fit the original craftline 68 window now I need window seals all around for this 68 old wood window. Please let we know if there is any replacement item is available , I have 5 windows that need it. the window is 23 wide by 43 long. Tha ... (cont.)

Old weatherstripping taken from a wood casement window approximately 25 years old. The window brand is Truth. Model is WS-5 LP. Looking for replacement weatherstripping.

Need the tubular weather stripping for the top and bottom sashes, as well as the parting strip tubular weather stripping where the sashes meet. (meeting rails). Push in / self locking teeth type.

Hello -- I have been unable to find a bulb type weatherstripping for Hurd casement windows manufactured back in the 1998-1999 time frame. I need to replace about 200-300 feet of it in a couple of dozen windows, since most of it is now brittle from age and UV exposure. It's an oblong bulb type wit ... (cont.)

I have to replace the weather stripping on my windows. I believe the windows are original with the house, which was built in 1989. Thanks!

I need the weather strip for my wood sliding door. Home built in 1979 and this is the original door. All of my windows and doors are heavy wood, and the only hardware is on some of the sliding windows Caradco gold hardware. Weather strip is in vinyl and is cracked, falling apart. Height is appr ... (cont.)

The 58-053 bubble seal looks like what is (currently disintegrating) in my windows except that the dimensions are just a little off. The bulb on mine seem to be 1/4" rather than 5/16" and the base height is skosh over 3/16" rather than a 1/4". Do the differences matter? Is 58-053 still the right ... (cont.)

Looking for replacement seal bulb is 1/4 diameter with a kerf insert base height of 3/16 and base width of 1/8, for a wood slider. Any recommendations.?

Having trouble matching some possible Hurd weatherstripping. We have the 58-053 locally, but it will be too wide for these windows. The bulb is 5/16" tall. The base is 1/4" tall, but the single fin at the bottom of the base. is only 3/32" wide. There is no second fin. The top of the base is 3/16" wi ... (cont.)

Swisco, 7/31/14 Below is a picture of my exterior entrance bubble door seal. The grid lines in the back ground are 1/4" for reference. I have also included a sketch of the door jamb corner where the seal is to reside. Do you have a replacement seal that can fit this configuration? Thank you, ... (cont.)

Hello, I have aging weather stripping on several Pozzi awning-style windows. The bubble seal weather stripping has disintegrated, but I found enough for some photos. The overall width is about 1/2 in. The bubble is probably 1/4 in in diameter, and the attachment strip is also about 1/4 in. D ... (cont.)

Hello, I am attempting to identify the plastic/vinyl weatherstripping part that is shown in these images. We are restoring a home built in 1880 and due to a federal registry issue, we can only repair windows with 'like parts' and cannot install something that looks totally different. Thus, I need ... (cont.)

I need 3 32" lengths of the weather stripping featured in the attached pictures. Can you help?

This is off a old weather shield wood casement window, the two fingers go into the sash, then there is a bulb on the opposite side thanks for yur help!

I have a 3 glass Marvin casement window that is 37 years old. The window wood and glass are in good condition , but the weather-stripping in not sealing. Is your product #58-053 (White) a replacement for my Marvin casement window?

this came off a front entry door that has side windows that pen up on ecach side . this weather stripping came off the window frame to seal window when closed the round part looks to be about 1/4 inch from the face of the round bulb part to the first bend is 1/2 inch the leg that goes into the ... (cont.)

This is for a window, the bubble is 1/4 and the leg is 1/8 Any help would be appreciated. Eric

I am looking to identify theses parts and possibly perches the parts. Do you know what this is and do you have them? I am looking to do all the window's in my home. All the windows are the same and have them two seals. Thank you for your help

Trying to identify (like) part

You guys helped me out before. I purchased the bubble weatherstripping and found out it only works on the sides of the casement windows. The upper and lower weatherstripping looks like the attached photo. This weatherstripping inserts into the metal channel. Thank you, David- Happy Thanksginvin ... (cont.)