Viewing all customer Discussions for:

58-055 9/32" Bubble Seal With Angled Base, 25ft

I need to replace these seals Please help Thank you

Looking for replacement part

Looking for replacement seals for my Caradco double hung windows. It's hard to find anything close to that bottom rail seal. Please help! Thanks David

This window weather stripping is 32" long (obviously cut from a roll) and 1/4" tall with two angled fins/barbs and a 1/4" foam filled round core. I show a picture of the profile above.

For Jeld-Wen casement windows. Width is 9/16".

The measure is centimeters. We need 440'. Can we replace the exact one? Or do we need to find similar?

Please see picture. Not sure of who manufactured the door but we have two of them and these seals go up the vertical edges

kerf depth is 5/16 is 90 degrees to the seal the other end was v shaped and broke off but is about 3/16 gap between the window and the frame. for windows with mfr code LN-1 series clad casement aama 101/IS 2-97 C-LC60-37x77 C-LC65-33x73 i was assuming the 9/32 angled base bubble seal would fit. ... (cont.)

This is from a French door from about the year 2000. We will need about 30' of it in brown or bronze. Could you direct me to the best option for this replacement?

Install date 2000. Is there an equivalent?

It looks like the 9/32" Bubble Seal With Angled Base is the right replacement for my windows. Is that what you see as well?

Please help identify weatherstripping.

I am looking for replacement weather stripping for 35 year old Marvin casement windows.

I could not locate any names or numbers on the windows. The windows are aluminum clad wood and are in very good shape for being 15 years old. The seals are not in the best of condition.Also need tilt latches. Holes are 2 5/8" center to center. 13/16" wide. Nose is 1/2". Unit has 2 pieces. Outer piec ... (cont.)

Window is 30 year old double hung. Weather stripping is 1/4" on section that inserts into window groove, 1/2" on the side that seals. Thanks for the help.Ed

do you have this

Replacement for Pella sliding glass doors. Photos attached

Hello, I need to replace the gaskets on my Hurd Windows. There are two types of gaskets used One brown on the window itself and another Grey used on the frame. File # 1-2 are the brown window gaskets and the "quinn" file is the grey frame. I hope the pictures are clear enough to properly identify. ... (cont.)

I'm trying to replace my window weather stop but cannot locate this style strip. Any ideas?

The strip is made from a hard plastic and is v-shaped with a 1/4" flange coming out of one side. The V pulls apart and its sides are between 3/8" and 7/16". The flange fits into a groove on the underside of the window. The windows crank to open. They are 30 years old. I wouldnt mind a different m ... (cont.)