Viewing all customer Discussions for:

15-145 Coil Support Barrel

replacement part

I am having trouble figuring out what coil part I need the only thing I see Is the letter c on the coil. The coil also snapped this is why it's not working anymore. I need to find the coil the rest of it appears to be fine

Can you tell me the correct replacement for this. I did not see an ID.

These are the photos of my existing hardware. I have singles and double coil springs. The cam has broken and no longer locks or unlocks the track. I believe my replacement part is 15-177 but can not verify by number on part. Please advise

Help! I bought a house with Alside double hung tilt out windows. I found the original invoice that says they were installed in 2000. There are no markings on the windows or the parts. I broke three when I tilted them out to clean. Do you have replacement parts for the parts shown in the picture I se ... (cont.)

I need all the parts for the window balance for both sides of the windowThe coil looks to be copper coloredThe coil material is 1/2 inch wideThe thickness of the roll when coiled its between 5/32 and 3/16 inchesIt is difficult to tell the color of the brake, it has a blue tint but is not a slate blu ... (cont.)

Hi?I need help. I have replaced the coil assembly, but the pívot I chose doesn't fit. Maybe I chose the wrong parts? So, I've decided to start over. Here are the original parts. I need to fix two windows. I would appreciate any help you can give. Thank you, Tina

There are no identifying numbers on anything. We think the windows are less than 10 years

this window has a serial number 051-492518, the window was installed in November 2001. There appear to be two stips of metal going from the coils to the pivot shoe.

I don't know the brand of window this is. Maybe the bar code means something to you. The bottom receiver on the bottom sash has broken apart (the aluminum round part.) I hope that you can come up with the part for me. Thank you

I need some shoes for my windows, not sure which to get

It allows the window to move up and down as well as tilt in holding the window in the track. I need 6 replacements and don't know where to find them. Can you help?

I have looked through several pivot lock shoes on your site but not sure exactly which one I have. Can you tell me which one I need to order based on the picture I provided?

Coil balance series: S140 Sash-weight: 21lb window Coil-stamp: None Quantity: 2 Comments: Mine was a 2 piece coil spring & a separate shoe. I need the double coil. Year 2003 Alliance

I am trying to replace the coils balance on a couple windows but cannot figure out which ones I need.

I need replacement spring assembly for a 2003 Alliance window.Same on both sides of window.Not sure if this needs to be aR/L or assembly fits either side

Looking for coil balance assembly for Alside Excaliber 2000 Series double hung window. Picture of pivot shoe attached which measures 1.25 inch wide and 0.5 inch deep.

looking through the balance shoes, i think the 15-177 is the best design match. it calls out the series 152 tape coil. the tape is 1/2" wide. how do i find the weight rating on the tape? shoe is 9/16" deep, 1 1/4" wide, but only 1 3/8" tall instead of 1 1/2" tall. let me know if there is a better ... (cont.)

Hello, I'm looking for a set of balancers for a Wasco 28 3/4 x 45 1/2 window. The window sticker shows below info.:Warranty Info: 123-649402PO: 237109/18/0728 3/4 x 45 1/2Best regards, Yui

I need a double coil balance replacement or a substitute ( modern ) which can be used in my single hung tilt coil balance vinyl window. The plastic between the the two coils is broken which stops my window from closing completely and securely. I am not comfortable in removing the broken coil balan ... (cont.)