Viewing all customer Discussions for:

58-134 Commercial Bubble Weatherstrip, 25ft

Windows were installed 2013 and the weatherstripping on the bottom panes has shrunk in length. It's attached by sliding it into a "T" channel in the aluminum frame.

NEED the RIGHT PIVOT SET. The one I have looks similar to a pivot set from US Aluminum, your Product Code: 79-097, but I am not sure. The door swings to the inside of the building and when you are facing it the handle is on the left and the two pivot hinges are on the right. PIC's 2059 and 2062 show ... (cont.)

Windows were made in 1989 by Georgia Pacific for NuSash. This stripping goes around the window frame. We need to replace this stripping as it has come out over the years. Appears to have foam inside the stripping.

Looking for the parts above, all seems like the pivot arms are missing the screws.

I'm looking to replace the weather stripping on a floor door on my boat. It's from 2002 and leaks a lot. I have two additional photos I will try to send.Bill

looking for weather seal for Kawneer Door.

Hello, this is a bubble style seal for 30ish year old Alcon patio door. I've tried to purchase previous bubble seals and they weren't the correct size. This seal has about a 7.5mm base (flat part), and the bubble is about 7mm diameter. Do you have something like this? Thanks, Dirk ... (cont.)

We have several Lawson brand single hung windows, hurricane rated, where the bottom bubble seal has dried out and is cracked. The manufacturer has not responded to my inquires. I have attached a couple of photos using an extension mirror. I would appreciate a suggestion based on the manufacturer ... (cont.)

Hi,My condo was built in 2004 and still has the original Alcan windows installed. I just replaced the 5/8" top sash guides (which you provided, 18-166) on 2 of my windows and I noticed that the weather stripping at the bottom of the windows was completely dry rotted so I need to replace that. Howe ... (cont.)

I removed this from my Gapco aluminum window. The windows are 30 years old and the weather stripping needs to be replaced. I see an image of this type weather stripping on your web page, but I do not see an option to purchase it.

To whom it may concern, I'm trying to wrap up a project and this window has failed during our last rain storm. I'm not sure if it just needs new weatherstripping or something more serious is to blame (i.e stucco and waterproofing) Please if anyone can identify this weatherstripping and point me i ... (cont.)

That is the one of doors I need for 6 of them

This sill track exterior gasket has a hard plastic base 5/16" wide. Originally the back of the base had adhesive which held it to the sill track. The plastic base was vertical against the track and one edge of the base fit into the tiny track next to the sill track. The diameter of the tube is 5/16" ... (cont.)

i have a french door exterior the attached image is my seal demintions. 3/8 round x 5/16 plastic edge to slide in track on aluminum when door closes.do you sell one of these it is appx 82 inch legith

Can you help me with replacing this weatherstripping? One is for sliders, the other is for French doors.

Can you help me with these parts. Two balance springs, two shoes, two pivot bars and two top latches. The house was built in 1979.

Need 1in extruder silicone rubber for Marine tight seal hatch.

Plastic weather stripping on the bottom of the window. The part that slips into the track on the window is 1/4 inch wide. The circular part is about 5/16. These dimensions are on the picture if you can see it. The Alcan windows are about 30 years old. Thank you.

Help! I have 15 year old Traco sliding doors. The attached photos are pics of what I am looking for. I'd prefer what you see in photo number 2 without the lock cylinder assembly and the bump for it. If you can not find that, what is shown in photos 1 and three would work, but the stem from the l ... (cont.)

I have 7 windows I need balancers for. Five of the windows have a stamp number of 2940 (BSI) on the aluminum rail and are 30" long and 1/2" wide. One has a stamped number of 1730 and is 18" long and 1/2" wide. The last one has a printed number of 29 9 FS CALDWELL and is 30" long and 1/2" wide. I ... (cont.)