Viewing all customer Discussions for:

58-156 3/16" x 3/8" Foam Filled Bubble Seal, 12ft

The measurements are 1/4 x 1/4 and seems to be vinyl with foam inside bubble. The flat part squeezes into track on window frame

Can anyone tell me what this part is called? Gasket, weatherstripping, I'm not finding this part on efcos site or anywhere else for that matter. We installed the sliding glass balcony doors and this part needs replaced. Please help me find this.

Looking to find replacement sesls for my windows. I'm the homeowner and a hvac contractor

Hello. I have Certainteed windows that are ~25 years old and in need of replacment seals. I am not sure, but they may be the "Bryn Mawr II" model. There are two types of seals, an "inner" seal and an "outer" seal. I included photos of them on the window, as well as a cross-section view of each se ... (cont.)

3/8" x 3/8" bottom foam filled window seal. Believe they are 400 series windows. Have several windows looking to replace bottom seal. Replaced one bottom sash which had part # of 1610378

Hi - the door has two sets of the same weather stripping. Flat bottom 5/16" wide x a strong 1/32" thick, bubble about 5/16" diameter. Thanks, Steve

This is a 25 yr old PGT French door. I need 6 ft of new weatherstripping. I appreciate any help you can provide.

I have some tilt in vinyl windows I need replacement weather stripping for the sash bottoms. Appears to be some type of bubble stripping. I've attached a diagram with the dimensions and some pictures. An important aspect of the existing stripping is that it has an actual 1/8" wide "strip" fitting in ... (cont.)

it is a foam filled bead, with bottom flat approx 1/4" wide, and top bulb approx 3/8" tall. Probably need about 40 feet

I'm searching for a replacement for screen splines off my patio, it's an aluminum frame, like a pool enclosure (see pics) the spline is flat, Tshapes, with a bulb at the bottom of the T. A round spline if .165 fit very tightly, but did not completely full the channel with the screen under it. I thin ... (cont.)

Q-Lon foam weatherstripping from a vinyl casement window sash. I believe the house was built in 2006. I ordered some awning/casement sash Q-Lon weatherstripping from Amesbury truth, but it turns out it was the wrong profile. This is a t-slot type of profile, so my hope is that there is something clo ... (cont.)

I recently purchased item #58-156. It did not fit the channel. The seal I have is 1/4" x 3/8", it is foam filled. Do you have another item that might work?

Can I get this vinyl z strip in .1875 t slot?

Q-Lon

We're looking for replacement weather stripping for crank out windows. Series 8100 AAMA/NWWDA 101/I.S.2-97 and AP-LC25-48x36

I am trying to find a substitute for these two types of weather stripping for our Milgard Tuscany style windows purchased in 2009. Milgard no longer makes this weather stripping. Thank you.

These are pics of a patio door seal. It is the bottom part that slides in and out

Have some older Norandex windows. Hoping you can help me with the following: Double hung...bottom sash. I believe these windows were manufactured for norandex by Traci. Weather strip on bottom of sash. Single 3/16" plastic T.... Bulb height is 3/8." Need white color. Tube type spiral spring. ... (cont.)

I need a new seal for my sliding patio doors

MFR - Code: Summit Window (JW-9) Series 8630 Need weather striping that surrounds the lower casement awning window.