Viewing all customer Discussions for:

70-011 Leaf Spring

3 inch spring which retains window screen in place.

Hello, I have a few windows whose screens are missing their springs. The springs all seem ver similar to your product 70-186, but they are 3 1/4 inches in length as opposed to 3 in listed for the product. The holes for the spring are also 3 1/4 in apart. Do you have a similar product that could be u ... (cont.)

I am looking for a window screen, tension, spring to fit a Caradco window. See photos to show the length of the tension, spring and a picture of the actual spring.

I need a 4 inch tension spring similar to your3 inch spring Model 70-011.Would appreciate any help you can provide.Floyd

what is the length of #70-011leaf spring? trying to get close to my picture trying to match this tension spring

I could use some more of the springs that keep screens from falling down. They appear to be about 1/4 inch wide and about 3.25 inch long.

I ordered the wrong size replacement springs. The ones I received are too small. I was so excited to find them on your site that I didn't consider the size. Duh! There are 2 springs on each screen. They measure about 5 1/4 inches. Do you have anything like this? If you need more photos please call o ... (cont.)

Sir:I am looking for replacement window screen springs. Do you know how I can purchase a package of these. Thank you. Daniel

Would you be able to describe how these plastic clips work on my screens for my sliding vinyl windows? I am also looking for replacements. Thank you.

Hello,Somehow I managed to run over one of the spring clips from our KAS-KEL window screens. Needless to say, it no longer is the shape we need. Does anyone make a replacement that you sell? Clip is about 3 inches long with ends as shown on the mangled part (photo attached). Thank you for your help ... (cont.)

The balances are metal casings with springs and strings inside of them. The metal measures 29 3/4 long with the plastic tips on top and bottom it measures 31 inches in length the width is 5/8 inch. There is a metal clip at the top picture sent. There is a plastic piece screwed to the window which me ... (cont.)

Hello, I have a customer that wants me to make her some window screens. The only issue is that her windows don

I need to replace a tension spring that looks a lot like your 70-011, but the length I need is only 2-1/2". I don't have a lot of extra space, so 3" would be too long. Do you have one this size or know where I might be able to find one?

The window screens I currently use a plastic butterfly clip as pictured in the picture. They are pressed into the top and bottom channels. The one just installs the screen and tension on the two wings holds the screen in place. Problem is I am replacing these clips every few years as they become ... (cont.)

Hi I have older storm windows that tilt out to clean. I removed the screen because it was literally coming apart. I live near the ocean and all of the windows are difficult to open and close because of the salt. I removed the screen and had it repaired. now I am trying to install it and I am hav ... (cont.)

Need Screen spring for my crank out casement Crestline window....info on window is: SNE 1GCC@CBA 1GMAO R W1 (the R is a circle logo) Debbie

This part looks exactly like an Andersen Tension Spring I found online which was for a Screen in a door but the dimensions are different. The one I found online was 5/16" wide and 4" long. The ones I need are 1/4" wide and 3 1/4" long.

Can you passibly help me with who might be the manufacturer of this spring. I am looking fro 20,000 of this and 3 other types of springs

Here are picture for I device I am making that requires tension springs. The two shown holding something are an example of the use of the holder, My daughter purchased it at a show she went to. The two with the dimensions is the one I am building for here and need a tension spring for. Thanks fo ... (cont.)