Viewing all customer Discussions for:

80-106 6' Sliding Glass Door Track

The rod is broken that the sliding glass door slides on.

Sears home improvement put in a patio door that slides made by simonton . The bottom door track needs to be replaced. Can't find the right replacement part. The door is 15+ years old.

Need the plastic track that the stainless cover fits on,

Hi, I'm looking for the bottom rail filler to a sliding glass patio door. 2 of my patio doors have this vinyl(?) piece warped and need to be replaced. Each piece is 1.5" wide x 1" deep/thick. Do you carry a similar piece in stock and if so, in what lengths? Also, do these just snap into place or w ... (cont.)

6ft long. Need to replace. Would like to know if this part is available and how much it would cost.

Hi, my sliding door track has had corrosion damage. Looking for a replacement option. Remainder of the door is in good condition. replacement of entire doors would be more than $10,000. Just need a new track, doesnt have to be exactly the same. Was told its an old Boral door.

Here are some pictures of the profile of the track. Measurements are ~20mm tall and 70in long. I also believe there was a wire that was at the top of the V for support. Please let me know if you have any questions.

Door Track needed for a Citation II Patio Door. Tried putting a cap on it but the cap only last so long before the door deforms the cap. Door has to be about 75 lbs.

I have three doors on my mothers home that need roller and track cover replacment. I would need 6 rollers and 6 track covers. Each track is 117 long so I guess I would need 2 for each door? Please see the attached photos of the rollers and see if you can ID them. Thanks!

I have 3 sliding glass patio doors made by Peachtree that were installed 13 years ago and the metal track with insulating strip that the door rolls on at the bottom of the door has broken apart and I need replacements for all three doors.If you can help me, I would greatly appreciate it. ... (cont.)

Trying to replace roller track on my sliding glass door. looks like it stood up in the space that is about 3/8" wide. Track appeared to be triangular with base at the bottom of the space and the roundish track at the surface area. The track seems to have gooten bent, fell over and then flattened. ... (cont.)

looking for top guide and bottom track

What sort of offerings in the way of tracks do you offer for the Product Code: 81-149Stainless Steel Sliding Glass Door Tandem Rollers?

My sliding door states that it was made by Western Insulated Glass SGD-C30

Hi, hoping you can identify the replacement parts I need to repair my basement sliding door. Home is in Denver and is 27 years old. I don't see any brand name in the door. I need to replace the sliding track and the track cover. And also the door latch mechanism. The total width of the door is ... (cont.)

My sliding doors are 8 ft wide (96 in). I need a new bottom track but it doesn't seem to come in this length. Could I use two 48 in tracks as well? Thank you.

What prep would be needed to utilize the track cover on this track? It would easily snap onto the sections that are not damaged but half the track is bumpy like this. Would the areas that are lower need to be built up?

Please help me identify and replace the track and wheels for the door. thank you brian

I REQUESTING ASSISTENCE WITH GETTING THE CORRECT TRACK AND REPLACEMENT TRACK FOR A SLIDEING GLASS DOOR. THE HOUSE WAS BUILT IN 2007 AND I'M ASSUMING THE DOOR IS ORIGINAL. I RECENTLY ATTEMPTED TO TRY A PRIME LINE D 1527 ROLLER ASSEMBLY HOWEVER IT WAS 1/4 INCH TOO NARROW FOR THE BOTTOM OF THE DOOR FRA ... (cont.)

I'm trying to find replacement tandem rollers and tracks for this sliding patio door, but I can't anything about it. The only other clue I saw was that the glass is made by PPG.