Viewing all customer Discussions for:

80-111 6' Bottom Sliding Door Track

Do you have the Patio screen door guide for the Philips Product Patio door. Thanks

can you find this part for me a bottom track for a screen door 5/8' width 1/2" hight

I have attached the pic of the track I need replaced as it is bent up and I cannot open and close my screen door properly. I have attached the information from the glass sliding door and the door the frame. Can someone help find a replacement?

I need to find the bottom rail that holds the 3 ft sliding screen door to my simonton 6 ft slider,it buckled . Thanks Bob

the screen track is broken. a piece of the track has broken away. can this be fixed? my door is 20 years old.

My plastic sliding screen door track insert has degraded and is no longer usable. In a similar discussion on your website you suggested the 80-111 or 80-11A. I don't think those would work in my installation because the door rollers ride on a peak in the center of the track. The insert is 5/8" w ... (cont.)

I have ordered new rollers and a sliding glass door track cover from you which I should arrive at my home on 2/28/13. Several other sites recommend a small bead of adhesive on the old track when installing the new cover and one site suggests installing small screws at each end of the track cover. ... (cont.)

It looks like your model 80-111 will fit in my track OK but instead of rollers being located in center of track, they will be off to one side of track. Will this pose a problem with the screen door sliding correctly? The bottom channel that this track would fit in is not wide enough to allow me to ... (cont.)

Is the idea that the wheel will glide upon the vertical portion of this lower track? I was thinking (as I saw a neighbor's track replacement) that the lower track would be U-shaped to keep the screen from coming off an open lower track like yours. Am I looking at it incorrectly? Is the vertical port ... (cont.)

Hi there, I found Swisco by googling "sliding screen door track lower". I have three 6' patio doors of unknown provenance which use the standard el cheapo sliding screen doors available at any home center. The lower track has worn out on a couple of them and it doesn't seem to be so readily avail ... (cont.)

How is a Glass door track different from a Screen door track in terms of track width. Also what is the item# for Sliding screen door track.Could not find it in the catalog. Thank You Ben

Had a new top layer put on the deck and they covered part of the track (up to the rail that the wheel is placed on). The questions: 1. Is there a top / upper track that will keep the screen door alined while it's being opened? 2. Is there a modified bottom track that can be adhered to what ... (cont.)

Hi, I am looking for a track for a screen door i can install to a wood framed patio door. I guess i need an upper and lower track that fits standard rollers that i could somehow screw glue or nail to the wood. Thanks.

I have a sliding screen door where the plastic threshold roller track is damaged. It's profile shape is a fat plus sign "+". It is 1/2" high. It is 56" long. It sits in a groove in the wooden threshold. 1/4" deep and 1/4" above. It is 1/4" wide. The 1/4" wheels on the bottom of the screen d ... (cont.)

I am looking to install a sliding screen door in my patio. It has a standard shingled roof with 4 x4 support posts and concrete base. My plan is to purchase a stock screen door from Lowes and use your hardware to mount. Do you sell an aluminum threshold or just the lower replacement track? If no ... (cont.)

Help! I have 6 FT FRENCH DOORS WITH NO SCREEN TRACKS OR SCREENS. THE BOTTOM SILL HAS A METAL PLATE BUT NO RIDGES. DO YOU HAVE A 6 FT TOP AND BOTTOM TRACK SET? THANKS SO MUCH, LYNN

I have a french door (double door where both doors are hinged and open). It is missing the top runner. On the bottom plate are couple of small ridges. I would like to know if these will work with a screen door and if so, what top runner would be recommended. One ridge is right at the edge of the pla ... (cont.)

Hello, I would like to install a rolling screen door on my french doors but the existing doors do not have a top or bottom track. I would like to order the correct tracks so that I can install the screen but I was unsure which items to order from your website. The bottom sill is aluminium, th ... (cont.)

I need a pair of sliding screens w/bottom track for an existing french door pair. How does the 80-111 install on an existing aluminum threshold?

do you have plastic track for rollors