Viewing all customer Discussions for:

81-001 Crossly Door Roller Assembly

This roller (Crossly Door Roller Product Code: 81-001) - is the only replacement roller I can find on your site with the exact dimensions - except the roller in the original is 1 1/2". Can I use this replacement roller with an 1 1/4" roller? Will I have a clearance problem with the bottom of the sl ... (cont.)

Hi, They are 15/16" wide and exactly 7" tall.. Doors are 45 or so years old. You can see a contractor tried to retrofit something and it didn't work. I need both a left hand and right hand one. Thank you, Bill

Can you tell what brand of sliding door this is and if hardware is still available? The house is a Mid-Century modern built in 1968 and we are trying to keep and refurbish a lot of the original items in this house. The doors are in relatively good shape but could use some new hardware in some areas. ... (cont.)

I measured the wheel at 1.5 inches alsoIt measures 3/4 to 13/16 wideIt looks similar to Product Code: 81-278Thank You

the part looks identical to 81=090 which i ordered but the dimensions were slightly off 81-001 looks better

Sorry I don't have any other information to help. I would like o have a double roller rather than the single roller if possible. Any help would be greatly appreciated. W. Waggenspack

It measures 2 1/8 " long, 1 1/8" tall, and 5/8 " wide. The roller is 1 1/4".

What is the maximum adjustment range form the bottom of the housing. Thank you

I am looking for a patio door roller. I am attaching a picture of an existing roller.

Looks like the Crossly Product Code: 81-001 is a perfect match but just want to run it by you guys for verification before ordering

See image posted

Hi, I am looking for replacement wheels for an aluminum sliding glass door for a house built in

Do you offer a replacement roller with the same external dimensions as the 81-001 but with a 1 1/2" roller?

The rollers I need to replace are from a metal sliding glass door. 2- 1/8" long, 1-1/4" high, 5/8" wide. The roller has guides on the side to keep it on track. I think the roller was metal? The housing has dimples on each side to lock it in the door channel.

frame is roughly 2 inches long and 1 inch tall & 5/8 wide

I am looking to replace sliding door assembly (single glass panel). Please look at the attached photos of the broken part and let me know the matching part number. Thanks, Zoran

Replace rollers Lincoln 6' sliders 1986 which one?

I bought the 81-001 item because my neighbor bought it and fixed his door. His door works fine now but it seems the wheels are a bit small and even with adjusting it the door just drags open and shut. Any ideas?

I have 4 sliding doors all needing new rollers and probably track covers. I took the roller out of one of the doors and have attached pictures. There are no visible markings are numbers on the cartridge. The demensions of the casing are 2 1/16" long x 1 1/8" high x 5/8 deep. The roller is 1 1/4" ... (cont.)

HI, My Crossly slider is of 1978 vintage. It needs rollers and w-stripping, felt, etc. The frame and door are adequate and attractive despite the lack of argon between panes My questions: 1. Would the model name or number be helpful in selecting the correct rollers? If so, where would that ap ... (cont.)