Viewing all customer Discussions for:

81-030 Acorn Patio Sliding Glass Door Roller, 1-1/4"

Trying to identify correct replacement parts. Both mine are seized. 82-095 , 81-030 & 81-157 all look similar but not confident in ordering. Maybe you have a better match.. Thanks

I've got 13 sets of doors that need new wheels. I'm directly on the gulf so I prefer all stainless steel if possible. This one is from one of my narrow doors, I'll pull a wide door next to ensure they are the same wheel sets. Obviously, it's a D-1002 (Nu-Air?) (Photo 1) Top Rail weatherstripping ... (cont.)

I believe from your website that I could use your part 81-081. Do you have a tandem wheel assembly that could replace it? My sliding glass door is very heavy and the single wheel assemblies don't last very long. Thanks

We need to replace 2 doors or 4 of these acorn door glides. Do you recognize them? Obviously had a bit of trouble getting them out!doors measure about 49 x 93"Thank you, Sally

This is one of two rollers from sliding glass patio door. I removed and lubricated but did not think to measure. The door does not roll easily so I would like to replace rollers.

Can you help me identify this part?

Came from a patio door

I am looking for replacement rollers for a Allside Patio Door 6100 Series that was installed in 2004

More than 25 years old. Rusted can't see markings.

Hi, My name is Jim Lynch. I've purchased parts from Swisco in the past with great results. Thank you! I'm looking for a wheel assembly for a Stanley sliding glass door. I've attached 3 pictures. The plastic wheels are wobbling after about a year, making it difficult to open. I believe the Stanl ... (cont.)

Please see the attached pictures of sliding door guide assemblies to recommend a match for the replacement parts.Length of assembly is 4 1/8".Height is 1" Width is 3/4" I believe the wheels are 1 1/4" diameter. Not 100% certain. Thank you.Mike S.

Hello my name is Bob, I live in Stuart Florida.I am looking for rollers for my sliding glass door hopefully I can get them in stainless steel?Please feel free to call or email.Thank youBob

Here are the pictures I have of the rollers. I know it would be more helpful if the rollers were out of the door, but that is part of the problem. I have replaced rollers before and for the life of me I can't figure out how to remove them. There isn't a screw on the side next to the adjuster, and th ... (cont.)

I want to replace 2 or these.

Need two

I am trying to replace a roller that matches all the dimensions of the 81-030 except for the wheel diameter which is only 1-1/8".

I purchased the acorn replacement 81-03 rollers and they fit but my contractor says they were a touch larger than the originals. The door rolls but not as easily as I would like. we also bought the slider lubricant you sell and cleaned the tracks which look ok. I have other doors I want to fix and ... (cont.)

I have the following sliding double pane door: Viking Industries SGD-R15 Sun Valley-300 and I need rollers. I see you have R20 specied in the parts list but not R-20. Are they interchangeable? Thanks, Tony

Hi I have a few glass doors inside that use this system. I tried to clean wheels on one set because they stopped rolling. Would prefer just to replace. The tandem wheels unit is 41/4 inch and 11/4 inch depth. The wheel is about 1/4 inch wide My wheels have all jammed up and will not turn. I tried ... (cont.)

Hello, I would need to order 2 tandem wheel rollers. The rollers I need to replace are stamped: Del Mar Eng. Co Long Beach, CA PAT 3,670,357 The wheels are stamped: Kilian Toronto, CAN Syracuse N.Y. Dimensions: 4 3/4 " x 1 5/8" high x 6/8" wide ( including the wheels) I attached 2 p ... (cont.)