Viewing all customer Discussions for:

81-033 Sliding Door Roller, 1-1/4" Steel Ball Bearing

Enclosed are pictures of the part I need to replace. I did not see an exact match on your site. I'm hoping you can help by identifying a replacement part this week if possible. See attached pictures of existing roller part. The doors are very heavy. Thank you, Tami

The only making is an X stamped on the housing.

Door has no identifying numbers. Old steel sliding glass door. Body of roller - 2.25" Height - 1.25" Width - 0.75" Diameter of wheel - 1.25"

Hello, I have an old (30-45 years) sliding glass door. The rollers have been broken for a long time before I bought the house last year. I would like replacement rollers to nurse the door along until we can replace it as part of a bigger project. I believe the door brand is Guardian. The last ren ... (cont.)

Are you able to help identify a replacement roller? Thanks!

We need two of these rollers for a patio door. Can you help?

Hi, We have two Dorwal heavy brown metal patio doors from 1974 which need new rollers. The doors measure approximately 48"W x 79"H x 1"D. Can you help us identify what replacement rollers we need without taking the doors out beforehand? Sincerely, Kristin

Hello, Looking for the attached sliding door roller- House wa built in 1988 and have not been able to find the right replacement part in HD, Lowes or Amazon. You help will be appreciated. Thank you, Damaso.

It says "Product of Del Mar eng Co. Long Beach CA. Pat 3,670,357" on them.

can we identify this sliding door roller wheel

This was made by Del Mar Eng Co, Long Beach, CA

Please assist me to identify the rollers on my older sliding glass doors. The relevant measurements are: width (housing): 3/4"; height (housing): 1 3/16"; diameter (wheel): 1 1/4"; the wheel is metal. Pictures are attached. Thank you -- Tom

Please help me identify this roller from my sliding glass door. The wheel is steel but no part number on the assembly.

I bought an old house and the patio door wheels are completely seized. I really don't want to replace the entire door but I can't find any wheel assemblies at my local hardware stores. Can you help?

Hello, I was looking on the internet looking for rollers for my sliding glass door. My home was built in 1996 in North West Florida. I took these pictures a couple years ago when I tried to find them at Lowes/Home Depot with no luck. I currently have a renter in my home and they need replacing. I h ... (cont.)

Explaining glass doors are American standard brand, installed in the early 1980s. It is a heavy door, 4 feet wide, two single-wheel rollers with 1 1/4 inch diameter wheels, the entire roller assembly is about 3 inches long by 1 1/2 inches tall. Maximum width three-quarter inch or so. ... (cont.)

Hi see pictures. The dimensions are ~ 2.5" end to end, 1.25" inch tall, 0.75" wide, 1 1/4" wheel. Note the adjustment screws on top (vs bottom). These are approximate measures. The picture with the two wheel assemblies, the top one is a replacement that did not work because the adjustment screw was ... (cont.)

Please see if you have a replacement for this part. Width is roughly 3/4 and roller is 1 1/4 diameter.

Product of del mar engineering.

Metal rolller for heavy patio door