Viewing all customer Discussions for:

81-083 Patio Glass Door Roller, 1-1/8" Steel BB Concave

Product of Del Mar Engineering. Pat 3.670,357 1 inch diameter metal wheel 1 inch between the mounting screw and the adjustment screw on the end

These are the rollers from my 1972 PPG Herculite K 3/16" glass sliding door. There are no markings whatsoever on the door anywhere, other than the glass marking above. The glass is 32"W x 73" T. We had to unscrew the side of the frame to get to the roller. All measurements are the same as your part ... (cont.)

Photos attached.

Hi, We are looking to purchase 1 x pair of rollers to replace the defective pair on a door measuring; Height = 2055mm Width = 1210mm Thickness = 35mm The number on the side of the rollers is; D-719 I have attached images to assist. Please can you either direct us to a UK based company ... (cont.)

The door these rollers came out of is an older glass sliding door. Unfortunately, there were no wheels in them so I can't provide any wheel measurement. The length is 2 1/4 inches, the width is 1/2 inch, and the height is 7/8 inch. Any help will be greatly appreciated.

Need to order replacement wheels for the exterior glass patio doors

The door handle has 23/13 with company name (Woodbine Ind Japan) the rollers have no identification.

I will add photos of the roller I would like to replace...I believe your product # 81-083 is the closest match...would like you to confirm. FYI: wheel diameter is 1-1/8"; dimple width matches the 13/16"; width is approximately 19/32" ; frame is 1" high I need 10 of these parts...what would be the t ... (cont.)

I am looking for instructions on how to take these patio wheel out and replace them. I just want to make sure i do the right method so not to break the door.

Patio Glass Door Wheel Replacement similar to part number in your inventory: 81.083. Can we use 2 wheels instead of 1 wheel replacement part ? Does it make the door slide easier and is it worth it ?

1970s installation

Good morning I need a replacement part for this roller.

Aloha, I am looking for some replacement wheels for some PPG Hurculite glass sliding doors. Thank You, Nick

Please give the height (not including the wheel), width and length of parts 81-083, 81-093, 81-056, 81-153, 81-155 and 81-095. Thanks! I need new rollers but without this information I can't figure out which of these will fit my door!

Searching for replacement part for this sliding glass door this is approximately 50+ years old. Looking for complete roller kit or the tool used to extend or retract the roller within the kit. Many thanks

Looking for a set of the attached rollers for 4 sliding glass doors. Doors are old aluminum double pane and I cannot locate a manufacturer name anywhere on the doors. Roller wheels appear to 1 1/4". If you need any further information please let me know

This sliding glass door has no name. number or markings. It probably dates back to around 1960. The width of the channel is 7/8"

Hi, I need to buy 2 more door rollers for a different sliding patio door. I don?t know the brand of the door, but I?ve attached photos of the roller unit removed from the door. Can you figure out what unit I need as a replacement? Thanks so much. Rob

Please reply if you carry these.

Attached are some photos of a patio door roller. Please match up if possible.