Viewing all customer Discussions for:

81-144 Sliding Door Roller Assembly, 1-1/2" Nylon Wheel

I will need 4 of them, please let me know if you need any other details

I can't find these rollers, from early 80s all aluminum door. There is not a vertical raise or lower adjustment on the roller. The screw just pulls the roller in the bottom channel back and forth. Also, it looks like you have to take the vertical rails off to slide out the roller from the bottom ... (cont.)

They've finally worn out. Need replacements.

Looking for a match for these rollers. They are from a sliding screen door that's about 20+ years old, im not sure of three door manufacturer. Thank you

Please see attached pictures of my 1985 ish door that needs new rollers. Is this enough info? Thanks,

18 mm wide. 30 mm high. 58 mm long. Single nylon roller

Hoping you can help me out. I've uploaded two photos of damaged wheel assemblies for a sliding mirrored closet door. As you can see, the brand is PE Del Mar, and the concave wheel looks to measure about 1.5-in diameter. I'm thinking it is perhaps the 9-318 roller, but I'm trying to determine if that ... (cont.)

Inscription- Del Mar Eng. Long Beach, Cal. Pat. Pend Sliding glass door roller 3/4" wide. 1 1/4" tall. 1 1/2" diameter metal wheel.

I'm sorry that there isn't a picture of the part prior to removal but it wouldn't have been very clear due to all of the gunk and build up from spraying WD-40 for so long before trying to replace the part. One of the wheels completely disintegrated and was not attached to the casing when it was remo ... (cont.)

1 in wide 1 3/8 in tall 2 3/8 in long

How do I get the wheel out to replace...or can I just buy the exact same assembly?

The bottom hole is for the adjustment screw. The top hole is for the frame screw. They're offset, front to back about an 1/8".

I have a Del Mar Eng roller with a pat. # 3670357. It has a narrow tab and most of the off the shelf ones are too wide. The roller is nylon and I believe 1 1/4". What would your replacement part be?

Hi I need two glass patio door rollers. The roller itself is 1 1/2 inch in diameter. The other dimensions are in the pictures. I think I found one that will work but I wanted to double check before buying. Thank you

Hi there, This is from an aluminum frame glass closet door most likely from the 70's installed in a condo in Las Vegas. I don't have an image of the frame but can get one next week as a follow up. Please let me know if I can provide any further detail. Thank you!

I am having trouble finding the correct replacement patio door roller assembly. The Prime Line F tab roller assembly D1509 is the correct size, but the tab is about 1/4" too short to allow the screw connecting the door style to the bottom rail to fit into the mounting hole. Do you know of a differ ... (cont.)

Do you have these in stock? Originally purchased 81-039 and they're the wrong size. 81-093 is close, but it's a smaller roller, does that matter? The roller on the original is 1.5 inch, so it's larger.

Please ID the replacement parts for this sliding glass door roller assembly per attached photos. Thanks

Del Mar Eng Long Bch. Ca. PAT. 3670357

Hello, hope these pictures will give you an idea of the roller type I need. The measurements of L 2.25 x H 1.5 x W 0.75 are approximate.