Viewing all customer Discussions for:

81-228 1-1/4"dia Nylon Concave BB Wheel

Wheel sliding screen door

Wheels are 1 1/4" width with nipples is 3/4" length is 4 3/4" depth is 1 1/16

We have 12 sliding doors that have become difficult to slide because of flat spots and wheels no longer turn. The doors are 12-13 years old in an island environment. Do you sell such a door part?

Closet door is brass and glass. Not sure of the plastic roller is replaceable or if I need a new unit altogether. Case is appox 0.58" wide, 2.32" long (looks to be adjustable), and 1.05" tall. Unsure of roller diamter but has a marking of C-Co on it if that helps.

I'm looking for a replacement for a broken patio door top roller. The screen door hangs from two rollers mounted on the top of the door. The bottom simply has a plastic guide that fits around the bottom track.

It's for a1971 key west mobilehome glass closet hinge 11/4" wheel, has no number on it

Rollers snap into assemblies. They are 1 1/4" dismeter

No identifying letters or numbers on the roller.

Could please find the attached rollers? I need 12 pieces. thank you John

There is no name on the doors so not sure who made it. It matches one of your items but the diameter of the wheels is smaller on mine. Will that still work? It matches your item product code 81-087.

Hi, I have a nylon wheel version of 23-288. My roller has no markings on it to identify the manufacturer but I compared all the measurements and they are an exact match. I have a brass colored metal track for 2 mirrored indoor sliding doors. I need to replace all 4 wheels (2 for each door). Do you h ... (cont.)

Hi can you identify my sliding door roller? Length : 4 7/8 in Width : 3/4 in Height: 1 3/8 2 Wheels: 1 1/4 steel and plastic with bearings

These rollers are from a vinyl clad patio sliding door. The closest match I found was the 81-030. My part is 3 1/8" long, 3/4" wide, 1" tall, and the rollers are 1 1/4" diameter. (The 81-030 is 1 1/8" tall, but I don't think that will be a problem.) The main difference is my rollers are nylon. Doe ... (cont.)

I believe this patio door was original to the manufactured home. The rollers are pretty corroded and I couldn't find markings. I also didn't get all the photos you suggested but I believe these may be enough to identify the roller. I think it is Dual Roller Assembly, 1-1/4" Steel BB, Product Code: 8 ... (cont.)

Hi Swisco - in my closet I have four sliding doors on two tracks. For one of the doors, the wheel on the bottom of the door broke. So it's not sliding anymore. I need to get a new wheel. Picture of the piece I need replaced is attached. The wheel diameter is 1.25 inches. The whole thing from top to ... (cont.)

HiI need this wheel roller replacement for a sliding glass door, however I need the wheel at 1-1/4". I cannot seem to find that on your site. Please use this roller part number which you do have as 1-1/2". Part # Patio Sliding Glass Door RollerProduct Code: 81-087. I look forward to hearing from you ... (cont.)

I ordered the 81-087. The wheels on yours is a 1 inch 1/2 . The ones in the door are a 1 in. 1/4. The inch and half will not work. Any suggestions?

It looks like these are the original parts. the diameter of the wheel is 1 and 3/8. The material of the wheel is steel, I prefer nylon. I will need 4 pieces. the width of the unit is 3/4 inch. the length of it is 5 inches.

Hi, Trouble finding replacement parts for several old school sliding mirror closet doors. 1 1/4" nylon wheel sliding mirror door assembly aluminium housing Thank you.

No door brand known.