Viewing all customer Discussions for:

82-040 Secondary Patio Door Lock, Winged

I ordered part 82-040 to replace a broken lock like the one in the photos, but the back of the part I ordered is flat. If you look at the photo of the side, you can see it is notched out at the bottom to accommodate the metal bottom of the door. Do you have a part with the notch in the back? ... (cont.)

I see your patio lock, Product Code: 82-040. Do you have such a lock with a keyed lock? I need two keyed slider locks for hollow core closet doors. They do have a wood rail at the bottom of the doors, so i should be able to affix such a lock to the rail. thanks!

My current door lock keeps popping up into the unlocked position and I feel maybe it's time to replace it. When I and/or pets bump the door just a little it pops open. I removed it and the lock snaps fine. Just wanted to make sure it's a match and if there's anything you might tell me about this sit ... (cont.)

Need to replace the one on our patio door and would like to know the measurement of the screw hole distances to determine if the spacing is the same as my broken one so I won't have to drill new holes and if it will fit into the lock keeper. Thank you

Hi, can you tell me if this is plastic or metal? Thanks!

I'm trying to add a secondary door lock to my patio doors. I don't think we have a threshold that would support the bolt, so I'm considering turning the bolt horizontal, overhanging the edge by about 3/4", and using a secondary keeper to gain another 1/4". (The gap between my stationary and rollin ... (cont.)

Can you tell me the exact measurements of this lock (or post a schematic), as I am trying to replace an existing Vetter slider that looks the same? Thank you.

I've ordered two foot locks one for older patio door it talks about mounting on floor can I mount on top. I also have a screen door On my camping Trailer want to mount on screen door any thoughts.

I need the sliding door lock with handle as per attached picture. We could not find that lock from any hardware stores. Please do the needful ASAP. Also attached the picture of the sliding door stopper. I would like to know is there one part which hold both holes or should i get the same one as w ... (cont.)

Please advise if The Enclave of Palm Beach, 3170 South Ocean Blvd. Palm Beach 33480, has purchased the attached lock and what the cost would be for 100. Thank you, Kimberly

I have 3 patio doors with the Winged Door Lock (82-040). One of the door locks does not stay locked. It engages, then after some time, it releases. I last replaced it with Order Number 436550. This is the 3rd. lock placed on this door. The other door locks work fine. What could be causing this ... (cont.)

I have a Truth/45010 which needs to be replaced as it will no longer lock. Part # 82-040 looks similar, however, I need to order it in white. If you do not have that part # in white,will part # 82-051 also work?

We have a 3-section sliding glass door leading to our lanai. I'm looking for a key lock that works both from the inside and outside. We have hurricane shutters over a portion of our lanai; one allows access from outside and inside the lanai. If power failed, can get into the lanai through the hurric ... (cont.)

I have a question about a replacement part I'd like to order. I know what it is but your site does not list color(s) available. I need a 82-040 (Secondary Patio Door Lock) in what I believe Truth calls bronze or I'd call a dark chocolate brown. I see the photo but want to make sure that is the co ... (cont.)

Looking for replacement surface mounted, pushbutton locking device made by Truth. It contains a spring loaded post 2 1/4" long and a spring loaded rocker type release that has "push to release" stamped into the plastic. Inside there is a number 45010. The casing appears to be plastic with a wing sha ... (cont.)