Viewing all customer Discussions for:

82-043 Andersen Tribeca Thumb Latch Replacement

Interested in securing a replacement lock for the above subject, or in the alternative, a substitute for the same, preferably white.

Second type.Aloha,Josh

Andersen sliding door handle broke. House built in 1997. Tribeca looks correct but wanted to verify mortise and latch needed

I have enclosed a lot of pictures. My latch easily pulls out after removing the two screws. My screws go through the latch and are secured into the wod core of the door. It looks like the existing holes can be used to drill through the rest of the door and new longer screws could hold the locking me ... (cont.)

I have a broken Andersen thumb latch. See photo below. Is the part number 82-043 the correct replacement part. Thank you for your help.

lockset needs replacing...can you try to identify?

I am looking to replace both door handles and the lock lever for my 25 year old Renewal By Anderson Frenchwood Gliding Doorwall. Both handles and lock lever are bright brass and are severely pitted, with the finish coming off. The new style Anderson Frenchwood doorwall hardware has been changed from ... (cont.)

I have the mortise lock, Adams Rite Mfg, a 5 is stamped on one side. holes for mounting are 2 17/32 apart The key lock part in the picture has 7145-2 stamped inside. The bar which goes through the mortise lock may or may not be broken and too short , 7/8 inch sticks out of lock.. I am missing the l ... (cont.)

Hello - i have an old Pella sliding door that i was hoping to get new hardware for. Inside lock is separate from the handle. Pictures attached. Would prefer in brushed nickel vs. brass. Thank you, Joe

Hello, I need to replace these two with stone color interior handle and lock, also with bolts, thank you.

After investing time and researh into a viable replacement, company reps had no plausible fix or replacement. Willing to have some alternitive secure (exterior) retro lock assembly. Too exspensive to replace entire 9' full glass enclosure to 3 season room. Your help or advice will be greatly apprec ... (cont.)

Only locked inside-no out door mechanism

I am not sure if my door is an Andersen. I installed this 2006 and cannot Find any identifying company name or logo on door or parts. I need to replace the ENTIRE hardware. The previous tenant lost the keys and mangled the lock. I would like to have all new hardware.

Both mortise lock and thumb latch have AW logo. Mortise lock has two numbers 2573558 and 7700-14. Thumb latch has three numbers 71258-3, S2573983 and W2573554. See photo. Tom

Good morning, We ordered from you in the last couple of months. We would need (2) patio door handles with locks as the above photos.Could you please provide me with pricing as well as shipping delays?Thank youAnn Marie

Looking for a replacement sliding door latch for an AW slider. See pics for what it looks like. Any help will be greatly appreciated.

The handle on the door that you turn to lock it is broken. I used crazy glue as a temporary fix but it's not going to last too much longer....

Thumb latch is broken in locked position. Have 2 doors with same latch type ... but facing opposite direction. Most photos are from door with un-broken latch.

I am looking to replace the thing latch and lock and mortise on a set of Anderson gliding doors. I believe the doors are the Yuma model and we're most likely installed in 1989 or somewhere close to that. The label on the doors has 2565025-0001-121-100081-111805-12-9868 listed as the product ID num ... (cont.)

My son latched just snapped off, I think this is an Anderson door, But I'm not sure. Should I just replace the someone else or the entire block?