Viewing all customer Discussions for:

82-218 Mortise Lock, Round Face, 3-11/16"

Hello, I'm trying to identify this locking handle for a left side opening patio door labeled Guardian. Thanks

My handle broke on my sliding glass door. Can you recommend the appropriate replacement? Here are the details on the inside of the handle: Sash Controls, Inc. Ferndale 20, Mich. 060-1255

I have a sliding glass door handle kit. Interior wood handle with bronze hardware is Sash controls # 060 1255 or 1060 1255. The metal exterior bronze Sash controls handle is 1060-1256 I think. The hook is 1595. Do you have the latch hook. This part is approximately 1-21/32" long, with hammer portion ... (cont.)

Can not find any markings.....a spring broke on the inside of the mechanism....any ideas?

I am sending a series of images in multiple emails due to file size limitations. The parts that I need to purchase are the lock with 2 screws and the outside door handle. I have 2 sliding glass doors on my back patio, so I will am sending photos of undamaged analogous parts also. ... (cont.)

Hi, My patio door lock is not working. I am attaching the pictures. Please let me know the part I need for locking mechanism. Thanks Rao

I have an SGD-R20 94 x 80 sliding glass door. The lock gets stuck in the closed position when I move the handle. It can be manually moved but the door is now very difficult to lock. Door Lock measurements: 3-3/4 inches between the screws. Door handle measurements: 7 - 1/8 inches length ... (cont.)

I am including a picture of the part I need

Need replacement lock with inside handle and outside handle

Trying to submit but no luck, attached is the parts I'm looking for. Hole spacing is 3 15/16 says Canadian patent on it, mortise lock is W&F MFG. GLENDALE CA Does not need to be keyed.

Hi, We seem to be missing the lock portion of the handle on our sliding glass door. I just want to replace the lock on the handle, or do we have to replace the entire handle? Thanks, Hayley

Hello: What are you recommending as a replacement for this part number? Note: I confirmed, and the 060-1255 has 3 15/16" spacing between the screws. Many Thanks, - Gil

I removed the patio door handle and the latch inner/assy (because the latch didn't catch) and sure enough it fell into the door frame. I am looking for the latch assy for a Wenco door with the 3&11/16 for a 1&1/2 in door width. The handle screws are 3 & 15/16 apart. Yes, I should have watched the ... (cont.)

inside a patio sliding glass door just the lock

My patio door lock hook does not stick out to engage, because I guess it is too loose. I need to purchase a replacement. Essentially just the metal part in the center piece would be fine. Here is what it etched on the door:PPG Herculite tempered glass6CFR1201 CIIANSI Z-97. 1-1984SGCC-296 IGH239 ... (cont.)

I needed to rekey my 10 year old American Craftsman door, and in doing so dropped the original latch inside the door, never to be seen again. After 2 new latches, and 2 rekeys, and several professionals, and a replacement door handle, I have found that the replacement latch from Home Depot does not ... (cont.)

Hello, The door lock no longer works, house was built in 1984 and it is the original door. Only identifying mark on the door is Guardian which only tempered the glass. Side screw holes are 4 in apart and inside screw holes a 3 3/4 in apart.

I need a replacement lock/latch for a glass sliding door. The glass door is original and installed about 1997. Unsure of the brand but found a label with SGD R20 Series 4001. It is about 3 3/4 inches from middle screw to middle screw. Do you have a replacement part? Thanks

I have the 82-069 patio door handle. I need a new mortise lock. Will the 82-218 fit? And will the lock activator from the -069 fit into the activator on the 82-218?

Can you help me find the right latch for this door?