Viewing all customer Discussions for:

82-226 Mortise Lock, 4-5/8"

Old NAMI door handle broke, having difficulty identifying a replacement. Any input would be greatly appreciated. CODE: I-263-1 SPEC: SGD-C20 SERIES: 2200 MST: 9868

Hoping to get some help on finding the correct replacement part for this mortise lock for my sliding glass door. There are no markings/part numbers etched on the lock, so difficult to confirm. Thanks!

Not sure if this is going to be helpful. I purchased a home and the door handle is super loose. The bolts won't let me tighten them. Looking for a replacement but I also don't see a brand on the door. Can you help?

My lock and door knob are broken and I need a replacement, don't know any numbers, can you help?

No manufacturers marks visible on the roller units. Mounting holes on the mortise lock are 4-5/8 on center. Doors were made by a new york company, Challenger ?

When locked I can still pull the slider open. I believe the hook isnt fully secured when latched to the plate in the frame. I dont typically handle small jobs around the house but I think I can knock this out. I also gave you the serial number if the door.

This mechanism is shot, and super old. We would like to replace all of it. Do you have any suggestions? There are no markings, however. I appreciate your help.Andrea

I have attached a diagram and pictures of the the parts needed. We know these are Starline INC slider doors, which is no longer in business. The condo regime wants to keep the handles but many of the villas are experience the "thumb latch" falling off and we can't find compatible parts. ... (cont.)

Please review the attached photos of the lock and suggest the specific replacement parts needed to install a new lock system without keys.

Hi I have a PPG Herculite K Sliding Patio Door. My lock is broken, and it doesn't work. I need to replace the broken lock but has been finding it difficult to get the right parts from Lowes, Menards and Home Depot. Here is the information located on the corner of the glass door: PPG Herculite K ... (cont.)

I am trying to find a replacement lock for my Anderson Patio Sliding Door.

Looking for a part to replace this lock with, Al

The lock broke off and so did the plastic mortise latch. I've noticed that other motels have a metal mortise latch. Is this compatible? Looking for replacement parts to fix.

Are these pics enough the find this lock. Need Replacement. Dave

Need two handle sets with outdoor keyed locks. One set with indoor lock.

I'm looking for a keyed cylinder for the outside door pull. Please let me know what one works. The outside pull was made by Sash Controls Inc and the part number is 1963.The inside handle and trim has part number 1060-1943.The mounting holes appear to be 3-15/16.Am I better off to buy 82-306 keyed e ... (cont.)

I bought the Swisco 82-226 mortise lock, and it fits my door and works fine. But the hook doesn't reach out and hold my strike like the old lock did.Oh, and the hole-to-hole spacing is about 3-3/4 inches. What do I need?

I am looking to add the missing key lock and replace the handle if needed, looking for suggestions.

IS this product your? I need new handle lock and everythng

The Manufacturer is PPG Herculte Hole spacing 5 1/2 inches Entire handle is 8 1/2 inches Door is 2 inches thick I would be interested in just a handle if available. Thank you