Viewing all customer Discussions for:

82-226 Mortise Lock, 4-5/8"

Are these pics enough the find this lock. Need Replacement. Dave

Need two handle sets with outdoor keyed locks. One set with indoor lock.

I'm looking for a keyed cylinder for the outside door pull. Please let me know what one works. The outside pull was made by Sash Controls Inc and the part number is 1963.The inside handle and trim has part number 1060-1943.The mounting holes appear to be 3-15/16.Am I better off to buy 82-306 keyed e ... (cont.)

I bought the Swisco 82-226 mortise lock, and it fits my door and works fine. But the hook doesn't reach out and hold my strike like the old lock did.Oh, and the hole-to-hole spacing is about 3-3/4 inches. What do I need?

I am looking to add the missing key lock and replace the handle if needed, looking for suggestions.

IS this product your? I need new handle lock and everythng

The Manufacturer is PPG Herculte Hole spacing 5 1/2 inches Entire handle is 8 1/2 inches Door is 2 inches thick I would be interested in just a handle if available. Thank you

Slider is 20+ years old and the lock no longer works. Not sure if it's the white lever near the handle or the hook shaped piece inside the door. I was not able to find any indication of who manufactured the door. I did find several numbers which might be of some help as follows: K0121 POLOW36 Ca ... (cont.)

Hello - I am looking for a patio door handle. It does not need a locking mortise incorporated-because that is already on the door. The handle front and back goes over it. See attached picture. Ideally - I just need the plate on which the handle goes. Notice the plate has ripped over time. App ... (cont.)

Looking for replacement lock for this.

Hi. Unclear what parts needs to be replaced altogther

I have a padio door lock looks like the legacy 3 but I need it to be 4.. Do you have them? thanks

Are you able to get me a tumbler for this handle? I got it in my modular home in 1999. The door number is CCMC#12765-L

I am needing replacement hardware for this sliding glass door... God Bless

Patio door is 21 years old - locking mechanism will no longer work. Attached are pics from lock and door. Please adviseThxLynn

The latch for the sliding glass door will not raise the latch to lock the door. The inside lever is very loose and will no longer control the piece to latch on the lock.

The lock piece turns but will not catch. It needs a whole new locking mechanism.

I would like to replace my casement crank handles and the covers as well as the window sash locks in my whole house with black hardware. My windows are from Kolbe and Kolbe and the house was built in 1987. Can you find some hardware that matches this?

Hello! Can you tell me what parts I need to replacement this broken door handle and lock?

Hello! Looking to replace the lock and keeper on sliding door.