Viewing all customer Discussions for:

84-017 1" Screen Door Roller Assembly

wheel is nylon, 1" in diameter. 1/4" wide, with concave grooves approx 3/16" deep. The wheel is secured to the track by a very tiny screw attached to a flat headed pin? There are two wheels attached to a metal hanger the metal hanger is slipped in a track that is attached to the house; and t ... (cont.)

Nylon roller is 1" diameter Inner brass fitting with threaded nut attached Rounded Brass washer

Diameter = 1" / 25mm thick = 7mm axle Diameter = 5mm pin on ends of axle = ~3.5mm plastic with metal axle I believe that this is a RiteScreen 140SMFIT30BN from ritescreen: JI2704ZY does this roller have the dimensions I supplied? thanks

Help! I can not find replacements for these anywhere.

How do I just replace the wheel on the bottom of screen door. Get the old one off and the new one on.

The axle for my screen door rollers have worn down and I need a replacement. Haven't been able to find one. The nylon roller itself is 1" diameter. the Axle is approx 3/8" long. Outer shaft diameter is approx 3/16", inner shaft diameter is approx 1/8". No markings on any part or the screen door itse ... (cont.)

Hello..what will be the max width of this roller with pin installed? I have screen that has opening of only 3/8..will this 84-017 fit? I can not have pin or screw taised bigger than total 3/8 from side to side. Thank you

Have you ever seen this type of patio screen door roller? It looks like it attaches to the corner connector but it is different from the one in your video for the 95-020. The roller opening is 3.5 inches from the edge of the screen door. On the top one the wheel only came off easily. Visually the bo ... (cont.)

My top channel actually includes a top and bottom rail on which a 1" diameter plastic roller rolls. I was unable to remove the old broken rollers without breaking them. I see that I can purchase 1" concave rollers from you. But I can't figure out how to get them on as they ride on both rails. Is ... (cont.)

Photos below show the upper track with rollers for what I believe is a WeatherShield patio screen door. The lower roller which I have already ordered from you are product code #84-034. My order #648407. Please let me know if you can identify part from photo. It is 36" long and 1 3/4" high. Thank ... (cont.)

I ordered part 84-057, but the bolt sticks out too far and the wheel will not fit back into the housing (or whatever you call it that the wheels fit into at top of door to slide around). I need a 1" wheel that is 1/4" thick that has an inset screw or bolt that won't stick out. The first picture sh ... (cont.)

Will your 84-017 work as a replacement roller for this track? Total assembled width of the the roller with attachment hardware through the hanger strap is 1/2" . The roller is 1" grooved X 1/4 " thick. Inside dimension of the track is 9/16" The strap is 3/16 " thick with extrusion. Thanks Mark ... (cont.)

Hello This is the roller hardware on the bottom of a cabinet we bought at Crate and Barrel. The nylon wheels are wearing out badly and never were really strong enough in my opinion to carry the load of the door for regular usage. I would prefer to replace the wheels, they are easy to remove from ... (cont.)

Hello I am looking for a replacement part for the bottom sliding closet door rollers that sit on a monorail. Roller: 1 inch dia Overall height: 2.125 in Width: 1.5 in Depth: .75 inch Thank you, Phil

I have a mid 1970's Caradco sliding door. The screen door for this assembly has two top mounted nylon, concave rollers. The rollers are 1 inch in diameter, 1/4" thick, with an approximate 1/4" center hole. The rollers are riveted onto an aluminum plate that then mounts to the door via two screws. ... (cont.)

This is an upper roller off a screen door It is a one sided mount, threaded brass center approx 1" dia., 1/4" width can't find it anywhere, can I retro fit another if unavailable? Thank You, Sam

4 wheels 2 top 2 bottom pop off tension bars which are adjustable but not removeable not sure of manufacturer of door wheel is quarter inch thick and 7/8 wide thanks brad

Take a look at the following guide that explains how to install the 84-017 screen door roller assembly.Guide: How to install the 84-017 screen door roller assembly