Viewing all customer Discussions for:

84-026 1-1/8" x 13/32" Corner Screen Roller Assembly, 15/16" Wheel

Looking for screen door roller replacement for Jen Weld Builders vinyl SGD door. It only has one roller, no adjustment screw. The door is 20 years old. Thanks for your help. Paul

Looking for replacements

For the 84-026 corner roller assembly, is the material for the metal housing steel or aluminum?

I submitted previous photos about this project. I ordered 4 - part # 84-106.I replaced the rollers at the top of the door easily.These pictures are for the rollers on the bottom of the door. they seem to be different than the top rollers. There are screws on the edge of the door, but they can't b ... (cont.)

I am trying to locate these rollers. Please advise cost and lead time

No names or numbers on the part. The only marking is on the handle and it says "CL".I haven't been able to find anything this large. Even the wheel is over 1". Any suggestions?

Have 5 screens doors that need new rollers, both top& bottom are the same I would like to try one to make sure it's the right part before I order them all.Feel free to email me Scott, Thank you

Roar assembly for vinwinco screen door

Need 4 - 2 left and 2 right. Not sure what kind this is. John

I tried to find and marks or numbers but have found nothing. I need all rollers replaced, two on top two on bottom

Need four of these please

Have about 10 screen doors need repair. The nylon rollers which are integral to corners, No marking on corners or screen doors.

Do you have corners like this? Or alternatives that would work with this type of frame?

What can I replace this with? I'm looking for something with a better quality. I'm not happy with the adjustments on this one. I was looking at 84-011 and 84-026, but not sure of the quality. Any suggestions?

Need help finding these part

Hello: I have tried to order from third parties and the parts are not right. Do you carry these? thanks in advance MFavetta

ItemReturning: Item 84-152 Item 59-054ReasonForReturning: Item 84-152 wheel was too small. There is no description on your site as to the width of the wheel. Everything else on the roller matched what we have. You should add the width of the wheel on your site. It doesn?t saddle 1/4? track. These ar ... (cont.)

Sir/Ma'am, I am looking for a replacement roller for my 2014 Jeld Wen screen door. I noted on your site that you have several that look similar to the one I need by the roller dimensions are slightly different. Please let me know if this is something you can help me with. Thanks?.Don ... (cont.)

I need to identify and order rollers. I don't know how they come out so can't get a picture of the whole roller. There is a coil spring around the pivot shaft. There are no visible screws on the outside of the frame. The adjustment screw is in the stile (vertical frame member). The wheel is 1" diame ... (cont.)

Hi, I purchased a pair of rollers from you a few years ago. It's time to replace all 4. None of the rollers seem to match what I need. Please look at the attached pictures and let me know if you have what I need. The numbers/letters are SBI 10-737. I look forward to hearing from you. Thanks. Lo ... (cont.)