Viewing all customer Discussions for:

84-026 1-1/8" x 13/32" Corner Screen Roller Assembly, 15/16" Wheel

I need screen door rollers I see a part number 60- 035 number 5 is smaller than the other number. Please give me the right parts I need 4 of this rollers

I'm looking for a roller assembly for a patio screen. I never seen anything like this. Do you happen to have this?

I have a Pella door assembly with a sliding screen door. Picture of original corner bracket attached. Picture of wheel assembly also attached. I believe the replacement for wheel assembly is 84-006S (??). What is the correct corner bracket? I don't see anything quite like mine in your catalog. ... (cont.)

Both the upper and lower roller assemblies in my door have fallen out. They resembleyour 84-091M but slightly thinner than the 3/8" thickness. They broke off the tip of the door corner insert. Do you have door corner inserts that will work in my doors and with my roller assemblies (they appear to b ... (cont.)

Rollers are made in the corner

I'm looking for the plastic bracket above that the screw screws intot to keep corner attached do you know if you have this peice? Thank you like always, Brian

Do you have this roller? I didn't see it. I see a similar one, but none with grove on metal piece.

As you can see, I bent it, from hitting it with a hammer, removing it from the frame. The only marking that I could find was up in the top sliding door frame. The outer measurement is 1" The bottom flange is 7/16" The top flange is 3/8"

Hi. I've tried getting these rolllers out with a philips screwdriver like your videos show. It seems like they are attached and maybe I have to replace the whole corner? Thanks for your help

Pat 3716890

Nylon/plastic roller 1.25" dia. 0.25" wide Length of metal piece holding the roller ~2.5" Distance between the center of the holes that clip on the door and the center of the roller ~1.5" Width of spring steel a little over 1/8" Length of spring steel ~2.25" If a drop in replacement doesn't exist, c ... (cont.)

PGT sliding screen door. Replacing rollers Need small white plastic piece that holds/secures corner screw Photos included

Hello, looking for a patio screen door corner that is build better than average, even better would be nice, my current corner is 1 5/16" wide by 1/2" thick, and the splines are 3 3/4" long to match the current hole. Wheel assembly needs to be serviceable, don't see a way to search for specific size, ... (cont.)

Can you please tell me what part I need for this door? The roller is white plastic and has chipped.

Not sure which items I can substitute for these. I took inside and outside measurements on the parts but they may be off a little since this metal bends easy.

Appears to 3/8 thick by 1 1/8 wide with 7/8 wheel

Hi, I have couple of pictures attached. It's this the right kind of corner. Do you recommend any other type? I would like something with the steel rollers. Thank you for your help! Alex

Hi. I need 12 of corner rollers. PGT sliding patio screen door that's about 20 years old. Has part number 60-03 5 stamped on it. Thanks

Metal housing with nylon concave wheel. No measurement taken. Hopefully you can identify the exact size by the marking. 60-03 sometimes with a small 5 after the 3, i.e 60-03 5, with the 5 being smaller than the other digits.

Is your product number 84-026 a form, fit and function replacement for part number 60-037, see attached photo. The wheel diameter for 60-037 is 15/16"