Viewing all customer Discussions for:

84-068 Sliding Screen Door Roller

I have found similar ones that look the same but they do not look like the have the same angle in the downward motion. The only model number I found was on the screen frame itself B-X1185AR.

This is a roller for a therma thur patio French door it's a sliding screen door .The other half is broken also It's held in by two screws and the metal bends at the screws I hope all this is helpful Screen about 4 yrs old It does have a v on the metal Thanks Tim

Need help with part number please. Thanks.

I need to replace roller that is corroded

Need 4 new rollers for sliding screen door...1986 lakewood trailer

I have a bit of a unique corner and roller design. The adjustment screw for the roller is at a 45 degree angle. And the roller is only 3/4" from the edge of the frame. I can not locate any corner that has this design. I'm pretty handy and have no problem using a Dremel to modify. I just want to ... (cont.)

Dear Swisco, I hope you can help me find a replacement part for this screen door. The screen door was made in Canada and here are the specifics: On the metal wheel there are some info: Toronto Canada 9476 3 The wheel diameter is: .83 inches or 21MM The wheel width is: .21 inches or 5.5M ... (cont.)

I need to replace broken rollers and I can't find a match. I am wondering if this is close enough and if it may work. The shape isn't exactly the same but maybe with a little flexibility...? Attached photo is what I currently have.

I cannot find markings on the sliding patio door that it goes on,but I did find that a lock 82-008K will fit the patio door. I don't know if it is a Daryl or not. It was installed in or about 1971. I am also going to ask a question here pertaining to installing new weather stripping. How hard ... (cont.)

I need two of the following rollers for a screen door. Of your pictures to me it looked like your 84-005M without the bend I need. Thank you, Tom

One of holders has snaped where it attaches to the screen.Here is a picture of it can you let me know if you have a replacement one.Thanks