Viewing all customer Discussions for:

87-106 Sliding Window Roller, Concave Wheel

I need replacement rollers for the windows in my house. The picture of the roller which is removed is missing the attachment tab.The tag on the window states"MFGR TOM-014-1Scott

roller diameter 15.65mm roller width 4.8mm flat roller base length 24.5mm assembled roller height 20mm not markings on windows over 20 YO

Is this roller assembly available? Do not have part number or brand of window.

I'm looking for a window part G3052

Hi,I have a sliding window that is 6'x3'. The frame is made of aluminum and this part that I am looking for is the bottom. 1. Replace the partor2. Upgrade by adding a 2 or 4 wheels on the bottom for easy sliding.In the pictures you can see the part it self. Then in the other pictures you can see how ... (cont.)

Hello there are two of these rollers per aluminum window (in a veranda), sorry I don't have measurements, they slide into place into the bottom of the window but are not screwed in. A local vendor thought HWP17 ROLLERS would be a match (not sure if it is an exact match). Thank you. ... (cont.)

I have an aluminum sliding window and it needs two (2) new rollers and a plastic assembly with screws) for the rollers. The plastic assembly is black in color with two screw holes (one at either end of the plastic assembly) for attaching to the underside of the sliding window. There are two grooved ... (cont.)

I have attached pic and measured. The roller unit is 1 3/8 long by about 1/2 wide.Have Two rolling windows. Do I replace wheel unit or wheelsMany thanksRWS

Good afternoon, I am looking to buy replacement window rollers for my home and have not found the correct fit for my windows. Ive tried everwhere with no luck. I was hoping Swisco can help. Attached are the pictures of the original rollers. Pictures of it installed and uninstalled with measure ... (cont.)

Hi, There are no identifying numbers or company name. Help. I need four. This is for two very heavy 1965 apartment windows that slide to open.

Can you tell me the diameter of 87-089 at the smallest point of the groove? Thanks. I'm looking for a ball bearing roller with less than 0.43" at smallest diameter. This doesn't have ball bearings, but it might be good enough. Do you know of a better choice? Slide-co has 172531 with an outside ... (cont.)

#87-106 What is the overall height of the assembly. Mine is 1/2 inch. Thanks.

Is this product available in stainless steel or brass? This is for a marine saltwater application 81-090 Do you also have parts like the attaced images? The part with concave roller is about 7/8" w x 3/8" d x 1 15/16" tall and the roller is 7/8" in diameter. And the other smaller roller is ab ... (cont.)

Hi, I have attached some photos and hopefully you can figure out the part we need. I am told it is a sash balance. It is a sideways window and a plastic part has been thrown away by accident. It will not lock properly now.

Hi, I cannot locate replacement rollers for my sliding windows, vintage 1980. Do you sell the rollers shown in the photo? Width is 3/8" (constrained by window base shape), mounting holes are 1 3/8" OC (no constraint, any width will work), notched roller is 7/8", overall height (base to rim of ... (cont.)

Thanks for looking! The bracket is 1.5 " long 7/16" tall and wide The wheel is 1/2" dia with a 4/16 hole The axle is 1/2" long and 3/16" dia I found no labels,stickers or stamps on ant part of these windows The complex was built in the early 80s Jeff

I'm looking for a roller for a patio screen door. I did not see one on your website that matched the one that I have. Attached are three photos of the roller that I am looking for. Can you please see if you can locate a model that resembles mine. Thank you.