Viewing all customer Discussions for:

90-114 Binnings Window Keeper, 1/2"

can we come up with a latch that will replace these latches on these old metal windows.

Hello, I need help identifying the correct window lock size for my window. The top window is fixed in place and the bottom window moves up and down. I have attached photos of the broken lock with measurements alongside the latch. Thank you for your help.

I am trying to replace an existin Lock and keeper for a vinyl replacement window, approximately 40+ Years old. The existing lock is from a Thermal Gard by Season-All, and has a stamp code of 9172 on the underside of the lock. The keeper resembles a Binnings keeper. Do you carry such a replacement l ... (cont.)

holes are 1/2 inch apart and juts out about 1/4-1/2 inch.

I need replace my lock

Trying to find a replacement for these locks. The handle side is 2 inches long by 3/4 inches wide. The hook side is 3/4 wide by 1 inche long. These are windows in old military house built in the early 60s.

Old aluminum windows in Florida.Need balances and latches and some keepersMy research on your site indicates my balances (for 48"x48") single hung sashes 24" Series 351 (metal channel is 24" long w/o bottom or top nylon fittings) No wings top or bottom.Also the latches appear to be 90-031 although ... (cont.)

Hi there, do you think you might have this part??? Please advise, thank you, Donna

Curved aluminum catch, for swivel lock, held in place by 2 screws attached to the top pane.

Need 2 sets of these that are mounted to the front of the window.

Would your part # 90-025 Work on the attached sliding windows? I am told they are Probably Acorn windows.

Looks like a double hung sash window lock but fits slider Aluminum Frame windows. Home was built in 1986. Looks like it matches your 90-025 (9o-020?) lock

I made some storm windows for a cabin and would like to find latches for them instead of replacing yhe latches every fall. These pictures are presently are on the screen . The window shop could not match this latch. I realize the latches are not made anymore since it's a 50's era cabin. Im thinki ... (cont.)

I called about needing help and was asked to provide photos of the parts I'm seeking which I provide here. 5- sash locks (attached photos with measurements): Center from hole to hole= 1-1/4". Sash riser height is 3/8". Sash latch height is 1" 3- 17" 1640 rated window balancer spring assemblies ... (cont.)

Im looking for these replacement parts on my 70s style sliding windows. The hook latch part is 3/4 inch wide by 1 1/4 long. The latch swivel assembly has 1 3/4 base with 1 1/2 mounting hole spacing.

Hi! I'm looking for the latch part of the images I uploaded. I went to Home Depot and they have nothing. The house is old and the windows are super old!! Any idea on what type of part I would need for this?

Hi, I need to replace channel balance hardware for two sizes of Babco metal single hung windows . I would also like to view a video which shows how to do the replacement where the hook on the block and tackle device hooks in the middle of the channel as these do. Stamp numbers: 24C Q 28C 28CZ I? ... (cont.)

Looking to rebuild 4 of these windows with balances, and other hardware to make them function properly.Thank you in advance,David

I need 4 sash and keepers similar to the two photos I just uploaded. The screw holes are 1 1/2 inches center to center. Thanks. Kevin

I have a flat front mounter jeeped that is 9/16 high and 2 screw holes are separated by 1". The depth is 1/8" at the thickest point (the hook). Do you have this part? Also, which part would be the matching sash lock?