Viewing all customer Discussions for:

90-136 Flat Replacement Keeper, 2-1/4"

Hi- Looking for these sliding window locks. There isn't any brand name I can find on the window. Only a single label that probably doesn't mean anything. If anyone can provide me with a good part number I would appreciate it. Thank you

Hello, I'm looking for help finding a comparable part to the broken sash and keeper I have. It's 1" x 3" with 2.25" center to center for the mounting holes. I'm just hoping for the closest white lock that fits, not too concerned with matching the style, any help would be much appreciated! ... (cont.)

I need to replace these. And don't have much room in between so don't know which one would help to lock the window

Need replacement window latch for Viking vinyl single hung window

The latch and the keeper is for the window sliding up and down and the distance between the screw holes is 2 1/4", can you please identify the part number for me?

Hello,I saw one of your Q&A's and this Atrium lock looked to be the 90-005 part. I am looking also for the keeper for this lock in the photo as that is what was broken on our customer's window. Thank you!!

Please see photo of sash lock and keeper. I think this might just be the thin plastic keeper in my cart (hopefully you can see). In one photo, you will see the damaged lock that is missing the keeper. I would like to simply move it over and install a new keeper. Thanks Bill

I would like two replace both pieces but not sure witch items to order and the screws but white screws not silver and id like to do it on multiple windows

We are looking for the thin piece not the one with the latch on it. Picture 3137 shows the piece sitting up, the second picture 3136 is with the piece laying down flat.

Could anyone tell me what lock could be used as a replacement? The size appears to be 2 1/4 inches but is sheared off on the actual latch.

I bought the 90-180 sweep lock and the 90-183 keeper. But the sweep lock stands too high and won't engage the keeper like my old lock. It sits too high. Do you have anything with a lower profile? One of your customer service agents thought I should look at the 90-009 but that looks so different. ... (cont.)

This is 2inches long and 3/8 thick for tilt window lock catch. Thank you

I am looking to find replacement latches for a Viking window. The significant issue is the depth of the receiver. It is very narrow. Also, the latch mechanism is different than anything I am finding in stores. I had the windows installed in 2001.

Looking for a replacement part of the Sash Lock. The Keeper part is fine but please see orientation since it is not screwed into the window on the flat side. Hoping you can identify this since CARE-FREE do not have a site. I can find a similar parts but then I have to remove the Keeper and dril ... (cont.)

Hello,Once again we need your expert advice. My Property Management Company Pontar Real Estate has previously purchased Window Locks, 2-1/4", product code #90-009. We now need the Flat Replacement Keepers to match. However, I am not able to find the appropriate size on Swisco.com website. The mea ... (cont.)

I'm looking for replacement window latches, "Care-Free" is cast into the existing latch. The window is a horizontal sliding window, with the keeper mounted 90 degrees to the latch, so the keeper needs to have the "cut-away" for the latch to rotate and engage. The screws are 2 1/4 inches apart. I've ... (cont.)

Screws are 2 1/4" apart. vinyl frame. circa 1993

Im looking for the keeper for the lock on a Hurd doible hung wooden window. See photo of missing and present keeper.

Hi, I don't see any identification numbers. This latch is broken - when you swivel it, nothing happens. They were installed 19 years ago. We also have a couple of windows where the latch doesn't catch because you can't close the window the last 1 mm. Is there a replacement latch that is angled t ... (cont.)

Looking for a few latches