Viewing all customer Discussions for:

90-161 Window Lock & Keeper, 2-1/16"

looking for the attached pella window lock/latch. Inside the lock, it has the number 45182

I measured distance between the drill hole as 2 1/8"

The window label - PGT Industries Series PVCSH22 I need 4 locks

The sweep locks are white and are from windows that do not have any manufacturer identified that I can see. The only markings I can see are on the bottom of the lock piece which has a one on the embossed on the lock, a 9 (or 6?) on the sweep and an icon that looks like a triangle within a triangle ... (cont.)

Hi, Sorry to see that your storefront is closed and that you can only order online. I bought parts from the store when it was open and used them . They worked flawlessly. I think I can use 90-077A along with 90-177. I need 15 locks in white the keepers on my windows look ok. As you ca ... (cont.)

I need advice on replacing the latches for our vinyl windows. Several of the flat metal plates have broken off leaving nothing for the rotating latch to grab. The sliding portion of the window that holds the flat portion of the latch is sealed. Thanks!

I need Truth window sash lock # 90-161 I see you offer in white but I need in Brass finish do you offer?

I need crystal brand keeper

Hi, here is another window I need to fix the lock on. There are several windows in my house that have these locks, the screws seem to be stripping the plastic and not staying in tight, which then doesn't let the window lock work. Is there a way to fix this? use bigger screws? thank you ... (cont.)

Screw holes are set back 7/16ths inch and distance between center of holes is 2&1/16th inches. Michael

I have MW windows in my home which was built in 1995. 8 of the locks are broken so I need to replace them. Attached are two photos of the locks. Can you please help me determine which one I need? Monica

I am trying to find white sash lock replacements for some Marvin wood double hung windows. I am trying to change them all from bronze to white. The windows are about 10-15 years old. The closest thing I found on your web site is code 90-161. The 2 1/16" hole span measurements match up on both p ... (cont.)

We are needing some sash keepers and locks for our Weathershield windows. The keeper and lock have 2 1/16" center to center holes. The holes on the lock are 7/16" from edge. The Weathershield number on the sash keeper is 40715 and the sash lock 45192. Can you recommend a sash lock and keeper for m ... (cont.)

We have custom windows by a company called Factory Direct in York, PA, that is no longer in business, and many of the locks have broken. The sweep fits the dimensions of your part 90-077A, but the keeper is longer. That is sized 5/16 thick, with holes spaced 2-1/4 inches. Can you match them? ... (cont.)

Hi, We moved into our house two years ago; in that time, the latches on about a dozen windows have broken partially or completely. The metal seems very brittle and light-weight, and the windows are probably a few decades old. There are two latches on each window, and we have no idea what brand ... (cont.)

Looking for this identical lock and keeper set style, but *with* alignment lugs. Do you have this for an exact match or should I go with 90-177 and 90-077A instead? Thanks!

hi there, i've attached some pictures of parts i need. based on what i see your site it appears my windows may be certainteed? would these be the correct products based on the photos below? 26-352, Pivot True Pivot Bar 15-150T, Constant Force Coil Balance Triple Support 15-150D, Coil Balanc ... (cont.)

hi, I have tilt windows that appear to be from home depot in 1997. You have parts that seem to be close but not exactly. I would love some help to make sure I get the correct parts. Approximate Measurement of pivot shoe: 2 1/16" by 1" -- I have not removed it out of the track yet, so if you nee ... (cont.)

I believe you could use a shim installed under the keeper part of the lock on the top window sash. Make sure the hole centers match your keeper. I think this might work.

Is the 90-161 keeper thicker on the side closest to the lock and thinner on the side closest to the window? It seems "angled" from the picture. Thanks.