Viewing all customer Discussions for:

95-015 Window Tilt Corner, 3/16" x 5/32"

I ordered/received 95-233 corners and 95-015 tilt corners from Swisscom recently. The 95-233 corners fit fine but the 95-015 tilt corners were too thick. The thickness of the old tilt corner is approx 7/64", but the 95-233 corner (1/8" thickness) fits ok. The 95-015 tilt corner is 9/64" thick which ... (cont.)

I'm looking for all four corner keys Two with the tabs and two without It's a Harvey window screen

Hi, there. I have 50-year old triple track aluminum storm windows on my New England home. One of the outside (upper) storm windows has both hinge keys broken off and I was told it can't be repaired because the window frame is riveted to the hinge key. Is this true? If it's not true, do you have the ... (cont.)

My window screen frame was destroyed. I'm trying to find a replacement one but have no idea what this latch is called. I don't know what to call it and this is the only picture I found that looks similar to it. When I try to look up latches I see pins with springs, tabs and all other types of hardwa ... (cont.)

Dear Sirs: I am searching for corner keys for a storm door glass frame which slides up and down for ventilation. I can't seem to locate a brand name on the door anywhere. I need the corner keys for the top, right side and left side. I am attaching pictures with a ruler for size. The thickness is ... (cont.)

Hi, I have old triple track windows and am in need of right corner keys - 1 for a glass storm, 1 for a screen, and extras for future damage. I have provided pictures of a glass storm and screen where the right corner keys are intact. Please let me know if you are able to supply these parts. ... (cont.)

I need replacement latches and corners for a storm door window. Need all four corners two with a small pin at the top of the corner and one sliding latch. See photo that says seal.

Hello I have quite a few storm windows on my rental house that need new tilt corners. I'd like to put on the die cast ones instead of the plastic type that are broken. I've attached some images and was wondering if you can tell me what type I need and also how to remove the old one and install th ... (cont.)

Hello, I'm looking for replacement tilt corners for several storm windows. The existing nylon ones are stamped in and has guide. The closest match I see is the 95-015. However it doesn't have a guide, does this matter? I have not removed the bottom corners, which appear to be ok. Just in case ... (cont.)

Hi. I have a customer whose storm windows are looser than they used to be, plus the screen track is notched in a bad place. This combination causes the screens' upper corners to come out of the track. I am looking for new corners with longer "ears" to make them work again. The dimensions are 1 1/4" ... (cont.)

Please help me in identifying the top tilts for my Storm Panel in the picture. All measurements are in inches. Thank You.

The bottom horizontal rail of the window/screen has a larger channel for the corner key than the vertical side rail. I tried part 95.016 which is 3/16" on both legs. It went easily into the bottom rail, but I could not get it into the vertical side rail. The vertical side rail opening looks to me ... (cont.)

I have several aluminum framed screen and storm windows that have broken tilt keys. I attached photos of a storm that has a plastic key, but most have metal. I have no idea how to take them apart to show the key outside the frame. Can you identify a replacement based on the photos? Wished you ... (cont.)

There are no markings on this part, but it measures 5/32 or MAYBE 3/16 square. I looked and looked at your parts listing but I am hesitant to choose as PL-15226 looks close but...... Thanks.

I am very happy to find your web site. Can you identify the top guides for a self-contained sliding window for an old storm door? The picture file named "window top right" shows the piece that holds the window in the door channel. The nib that fits in the channel is broken on the left and right s ... (cont.)

Hi, I need to buy some pivot keys for my storm windows. Several have become brittle and snapped off. They appear to be made of hard plastic. I will follow up with a measurement of the pivot key top length and side length. Are these fairly easy to replace ? Thank You George

These tilts measure 1 1/4 x 1 1/4 x 3/16. These appear to be made of nylon (or plastic). Would like to replace them with metal if possible but need assistance identifying which Swisco part best fits. The parts did not include any names, numbers, or markings on the hardware.

Replacement parts I'd and pricing 1) mostly need the corner with pins. Mine were nylon, rather have metal I think 2.non pin corners 3.) latches 4.) latch springs 5.) On the window side of the frame each channel as plastic rub strips installed in a narrow slot. I would like the strips or subst ... (cont.)

we have these storm screen alumni parts that need repair, there is no name on them but the clips are almost gone on all of them and some of the weather striping needs to be replaced

Aluminum Frame, the corner and tilt look like they are a 95-168 and 95-015