Viewing all customer Discussions for:

95-073 Window Corner Tilt Key

Tilt support has '10188' embossed in side

I need one of the glass retainers as pictured.This door is approximately 25 years old and still functions perfectly, but the glass will not stay in the frame with this piece missing.Also, this part appears to be basically a "press in" part which would be no problem for me to repair.Please advise acc ... (cont.)

I recently received item # 95-073 from Swisco. This part was twice as wide as the part I need, though they look similar. Please see the photographs attached. Please let me know the item # for the part I need, which is only 1/8th of a inch wide.

Hello, I have 7 storm windows with many parts broken. The corner latches are 3 13/16 inches with the point and the notch for fingers is 1/4 inch from end and 3/4 inch long. They are 1/4 inch wide. The end with the point has a tab (see photo of latch in place) that sticks out for 5/32 inch past t ... (cont.)

It appears this is the part I need, as the measurements match what I have. Two questions: 1) Does this come in white? 2) In order to install it, do I need to remove the screening, as this is a press fit?

I can't find this window tilt key on your Web page do you have one with the dementions in the photos or can they be ordered here or some ware else?

Hi there. I have storm windows where the 'nub' on the corner pieces has broken off so the window no longer stays in the channel. Attached is a photo so would you be so kind as to confirm which replacement part I should order? Thanks for your time and assistance. -James

The photos are from a 1' high 4' long slider, top window section. Two sections of the window slide on independent tracks. The missing/broken part is the top L that includes the portion that runs in the track. These are not house windows but are part of a metal deer blind. No other specs avail ... (cont.)

cant find parts for this.. post broke off and now the window wont stay in place

Holds top of window in place. Slides up. Part has broken off other side of window.Very old windows.

The part is from a crank-out window. Parts number on the window lock that I need is 9429 40MM. When I put in this part number the exact part came up from a NY customers post, however.... I cannot bring up THAT PART in your inventory. Similar parts come up but have different alignment holes. My par ... (cont.)

I have attached photos of the bottom window frame with left side latch still in place. I have also attached photos of the right side latch and spring. The catch on the spring did break when removing. I think the parts should be 91-001P for latch and 91-003 for spring. I could not find any names ... (cont.)

Slide Lock: 3" x 5/8" locking tab missing. I can only assume it is .25 to .5" Corner Key: 1/4" x 1-1/4" Cheap Plastic. Spring: 1"-5/8" including plastic keeper Let me know what you have please. (6) Slide Locks (6) Corner Keys / (6) Springs

Trying to find replacement tilt key for these old storm windows. And corrisponding corner keys if possible. Thanks!

Hello, I've recently taken apart the sash on my storm door. I'm looking for a source of the L-shaped fittings for all 4 corners.

You web site implies one is the mating part to the other (ie pins go on top corner and 52-201 goes on bottom corner. Dimensions on each are different on the leg, 95-201 is 5/16" and 95-073 is 3/16". The 95-201 is the correct dimension for my application but the 95-073 may not fit tight enough. Do ... (cont.)

How do you remove old and install new 95-073 corner tilt keys? Thanks.

Looking for both the Tilt and slide key for a set of storm windows. I've attached a picture with the measurements

Will window corner key 95-201 fit same window as window corner tilt key 95-073

Yes, black is the only color available for the 95-073 window corner key. Most of the corner is hidden from view so color options are not available for this corner.