Viewing all customer Discussions for:

95-176 Aluminum Corner Key, 3/16" x 3/16"

Good morning. Thankfully came across your website! I have 10 storms, but on one of them, the there is a screw missing that holds the frame together, which eventually caused the glass to crack. I'm not sure what the screw is supposed to go into. Any chance you can help me ID the part I'll need to get ... (cont.)

A customer asked me to re-screen all of their frames, unfortunately the nylon blocks holding them together have become brittle and are all breaking as I try to remove the screen. I cannot get one out intact to photograph (I don't want to destroy all the frames as I can still put most back in with t ... (cont.)

The sliding bolt is with the handle on the picture, but I don't need the handle, just a straight one. I chose the best I could, sine I couldn't fine exactly the same as mine, but I hope those will work fine

Plastic Internal Screen Frame Corners

I need right corner replacement

I need to replace some corner keys for screens. Not sure if you have them. I measured them and there 3/16 thick x 1 1/2 I added some photos. I would need about a dozen. I'll send some photos Thank you Tony

I need both sides and screws for each item shown.

one of these corners is 1-1/2 inches north to south and 1 5/8 inches east to west. With a width of 1/4 inch. The other corner is 1-3/8 by 1-3/8 inch With a width of 3/16 inch. A Swisco rep suggested that I purchase 95?016 for replacements However they are too thin and don't catch inside the slides. ... (cont.)

Dear Swisco, I need some parts to repair old storm windows. Image 8726 shows a right and left slide bolt to be replaced. If you have them I would like three right and three left. Measurements are: total length= 3 5/8 in; Body Height=3/4 in, Body depth thickness = 7/32, Nose length= 1 in, Nose Height ... (cont.)

Swisco I need at least 4 to 6 Galvanized Aluminum Corner for galvanized window frame. I cannot tell from the pictures on you website which are the best ones. My corners are 1 1/4 in long and 3/16 by 3/16 inch square. Which of your offering match this? Pictures below

My Storm corners are broken and I would like to find which part is best to fix them, please see attached picture of one side of corner that I could extract that was screwed in, the other leg looks like it is punched in the metal.

Hi I'm looking for a corner key part for a screen frame that fits in my Series 8500 Anderson replacement window, SL928921.1. The existing corner keys that broke are in the attached picture. It is 1/4" thick x 1/4" wide xapprx 1.5" long. Do you stock these items? I need about 12. thank you Frank ... (cont.)

Storm Door is A.J. Manufacturing sold by Menards, probally 20ish years old. Need both left and right latch plus corners, will be ording 2 sets of latches plus 8 corners.

looking for American Craftsman window screen frame replacement corner brackets None at the hardware stores will match or fit. Picture is a good one, several have broken in screen removal. Other pics show frame corner. Looked all over windows and find no labels to locate PN. Thanks, Jeff ... (cont.)

Hi can you help me find which window screen corner is a replacement for this picture. It is from Silverline windows. Thank you!

It's 1/4 in W and 1/4 in H it's 1 3/8 long.

Gentlemen,I am in need of corner keys, Silverline screen turn clips (I think), and hollow pull tabs to repair a number of screens.The corner key is 3/16" thick by 1/4" tall on each leg. Leg length is ~ 1 1/4" long (outside measurements)Also, I plan to replace the fiberglass screen with aluminum. ... (cont.)

my screen corners have broken after all they are years old ,, how do you get the old broken piece out of the frame >???

Could you help me identify this corner? I would also be looking for the top corners to match if they are not identical. I cannot tell; the tops are to deteriorated to remove. The are turning into dust.

This is a picture of a broken screen window broken corner. Looking to learn the company as I need the locks as well. I am looking for 2 to 3 dozen of these pieces. Thanks for your help