Viewing all customer Discussions for:

95-206 Square Cut Corner, Pair

HiI am looking for flange screen corners with and without key to redo about 10 screens. The corners have yellowed and are brittle and cracking. Any help would be appreciated. I can send in sample if needed.Steve M

Do you have these?. Two have a tab that hold the top of the screen in which is in the uploaded pictures, the bottom two not shown have no tab.

I purchased the 95-265 corners and they do fit, but I need the flange reversed. I included in the photo the old versus the new one that I received from you. Thanks for your help.

All of my screen corners are broken in some way so I am not able to send a picture of one 100% intact innorder to show you what I really need. The one in the photo still attached to the screen is close except it is missing the finger pull. Please note that the one I have off has the edges broken o ... (cont.)

I hope these pictures are helpful. Please inform me if you can help me with these parts and the part number that I need to reorder. Previously ordered part #95-206 Thank you

They are very brittle and cracking. I have 5 more pictures to show more details and dimensions if I can send them to you.Thank you,Rich

I have 15 year old Milgaurd windows and I need some plastic corners for my window screen corners ,are you able to tell me which model I need to order , either the model 95-205 or model 95-206 ? I was not able to attach a photo. Thank you, Mike

It looks like one you have on the site but mine is flat on one side and measures 3/8 thick.

Hi, Im looking for screen corners. I've uploaded some pictures and a drawing for your review

Recently purchased the 95-265. I've attached photos of what I ordered, side by side with what I need. You can see that they're almost identical except that the extended piece (the flange?) is on the opposite side of what I need. I'm also needing some corner pieces with a tab, and have included a ph ... (cont.)

I am trying to locate screen corners for my 16 year old SuperSeal window screens. Screen frame channel is 5/16 by 7/16.I need help.

Good morning, A screen took a dive from second story window and damaged two of the four corners on the screen. Can you suggest the proper part? Thanks, Bryan

I am having trouble matching my old parts to anything in your catalog, hopefully someone there can help find me the correct replacement corners, thank you

Hello,I am searching for replacement corner parts for my home window screens.The Windows are Monarch Century 2000. Ive attached pictures of the part and the paper attached to the windows when installed.The Windows were built either in 2001 or 2002.I look forward to hearing from you!Best Regards,G. ... (cont.)

Looking for a screen corner with flange and the tan that holds the screen frame is is spring loaded as opposed to the common fixed one. See photos.

5/16 corners. I need the ones for the top, with guide to hold in frame(pic 1520) I have ones with no guide to use on bottom

Thanks

I'm thinking 95-206 will work, but not sure...the website doesn't show any dimensions. Thanks!

I found replacement parts on your website, but I am not sure they will fit. Do you sell different sizes? I attached photos. Thank you.

No names on parts. Need enough for four screens.