Viewing all customer Discussions for:

95-206 Square Cut Corner, Pair

I believe the channels are about 5/8"x 5/16". the full corners are about 1 and 1/8" . You can see the the corner edge of each of these are broken. Looking for the correct replacements. Thanks

I believe the 95-206 will work for the corners, but I am not sure about the pull tab corner. If the 206's come in pairs how, or can, I get in set's of 4 for screens? Thank you.

Please help me identify the best corner key for my Milguard Window Screens

The legs are 5/16" deep, 7/16" wide, 15/16" long and the square is 13/16" x 7/16" thick

Screen corners are from a Milgard window. True corners are 3/4 by 3/4 by 3/8 thick. legs are 1 7/16 long by 3/8 thick. Thanks for your help!

I can't find these screen frame corners, tried everything. Please help thank you. the screen is from a seven-d windows.

Looking for some replacement Corners fore my Screens

I can't seem to find the replacements for these corner pieces. I have found similar but they seem to have the flange on the wrong side. Not sure if you stock the top parts as well. Thank you for any and all help you can render. Tom

I need six of each corner. These are Thermolock screens which is now Vinylmax. The size of the tubing that the corner piece slides into is approximately .335 wide and.405 high, the tubing thickness is approx .045 thick the corner square is approx 1.010 square. Thank you for all your support Pl ... (cont.)

I need a bunch of these corners and Rivco is out of business

Any Advice appreciated

Hello Looking for replacement corner keys for Superseal double hung screens Attached is the photo leg is 5/16 H... 7/16 W... 1" LONG flange area is 1" there are L and R corners as well as non tabbed Appreciate all your help AL

This corner seems to meet all the dimentions but mine has a leg, do you carry anything like this?

Picture 172059 is one of the top corner pieces that hold the screen in the window and also form the frame. Pictures 171950 and 171804 are one of the bottom pieces that form the frame this one piece showing both sides. All of these corner pieces fit into metal frame pieces that are around one half in ... (cont.)

these are from Milgard vinyl window screens. have any parts to match? thanks

Tried to put new screen in my frames and moat of the corner pieces broke due to what appears to be UV damage. The frame measures 3/8" thick. The squares at each corner measure 13/16" without the part that goes inside the frame. The lower corners have pull tabs and the uppers have a piece that sticks ... (cont.)

two different types of corners the top corner has a tab that fits into the window track and the bottom is a plain corner

Plastic fittings which insert into window screen frames to form corners. Insert dimensions are 5/16" by 7/16" by one inch long.

Does the 95-205 match up with the 95-206?

Good morningWe are looking for the screen corners for our windows. We are not sure of the manufacturer but have attached a picture of the sticker found in a window. The top corners have a molded nub like ramp and are marked right and left to retain the tops of the screens. The bottom corners have th ... (cont.)