Viewing all customer Discussions for:

S351-31 31" Series 351 Channel Balance

I have a broken balance that I'd like to replace. It's 1/2" wide and 31" long. It has "30-4 AP5 CMC 43" printed on the metal in blue ink. I think it's the Series 351. The bottom shoe looks like it's 1 1/8" deep.

30 A is stamped on the ballast

This balance is imprinted 30 C 3.S.I. The metal case seems to be 31" long. It has string and spring inside with plastic clips on the ends. I'll looking to purchase 20 of these. Please help. Thanks

Old aluminum up and down slider window 3010 stamp on it 1/2 in 31 in long

Hello. I have 25 yr old windows that were installed during new construction in 1998. The window manufacturer was out of Canada. Right now I need 6x 25in and 6x 31in. I will order more later. Ple see attached pics. Ple provide part #s so I can place order. Thank you: Zolie. Plymouth, MI. ... (cont.)

Hello. I hope you can help with this I believe this is from the series 395 Chanel balance. The number stamp in the balance is 3020. Also will need that top guide the part that goes attached to the window sash to retain the balance.

Need replacement balances

I purchased a replacement window guides a couple of years ago the part #CRL ALUM-FA2930GW-VCP-1 2930 Window Channel Balance with FS293BA Guides Attached was I need to order one more pair (2 each of these and I also need to order a pair but instead of being 27" I need one that is 31 inches as that is ... (cont.)

-31" - length -3030 - printed stamp -manufacturer unknown -4 total balances needed

Hi Swisco Help,I love your website and your YouTube how to videos!I need to replace some channel balances.Metal Length = 31-inchesWidth = 1/2-inch (see picture)Depth = 1/2-inch (see picture)I have also attached pictures of the top and bottom.Which model number is correct for me to purchase?Based on ... (cont.)

stamp picture also attached. it has 3040 And it is 31 inches. Picture of measurement also attached. Can you help me identify the exact part. On the website, I see different series have 3040 option. I don't know which series is the right one. Thanks!

I need 8 Simonton series 385 31" Channel balances

They are identified as BSI 30 3031 inches long metal end to end. Looks like your 351 product? Or 390 or 395?

Hello. I am trying to find the right replacement for this. The balance is for a non-tilting window. It measures 31" length x 1/2" width. It appears to have "3CG" etched on the balance. Please let me know if there is anything else needed to help identify this. Thank you!

I need to order 2 different types of channel balances: Type 1: 31 inches long Numbers: 3020 AC "B.S.I." Type 2: 35 inches long Numbers: 3430 "B.S.I." Can you please let me know as soon as possible what I need to order? I submitted a similar information request some time ago but didn't see a resp ... (cont.)

3030 number on channel. Spring is 15" 1/4 including hooks on ends. Channel is 32" including plastic clips. Windows installed in 1999.

The balancers I need have the numbers: 1530 (need 6) And 3030 (need 2)

Hi! I'm so glad I found your site. My windows are hard to move now (non tilt, one sash), after about 20 yrs. It seems the springs are pulling against me and need replacing. Does that sound right? Here are pics of the part I think needs replacing. It's 1/2" deep. The number 3040 is stamped ... (cont.)

31" - measured length. 1/2" wide Not sure which part series I need for sliding window( non-tilting). The stamp on the part says ( see pic above) - (03/8) Unique 30-c-30 Thanks for your help.

I just got my replacement for one of my windows and they worked and fit perfect. I am looking to order more replacement balances of a different size. I have 6 bay windows which require the 31 inch replacement. The order i just received is what i can duplicate for my remaining bay windows. Howeve ... (cont.)