Viewing all customer Discussions for:

S390-28 28" Series 390 Channel Balance

Looking on the site I can't tell if I'm seeing different options for this 28" block and tackle channel balance or if I'm seeing the same one in different product categories .28" balance with markings 2740 MK BSI. Goes to a massive two window Windsor 78x58 from early 2001.Spring side is 1/2" wide. T ... (cont.)

I need two window balances. The metal channel is 28" long and they are marked 2730 DL.

Sorry I sent so many emails , some ask for photos some do'nt. Hi, having problem with a window. I sent a email about Sash having 2 screws holding it in, 1 you can remove the other the head is missing, The same on both ends. I want to order 2 new channel balances also. length are 28" I will attach ... (cont.)

Please see the attached pictures, 28" length. Marking says 27 14L. Need 2 as both have broken.

I have 2 sets of channel balances that I need to replace. One is a 16" without the attachments and 153000H stamped on the metal. It looks like it had 2 wings on the bottom shoe but one is broken off. The second is a 28" without the attachments and 274000H stamped on the metal. It does not look l ... (cont.)

28 in Long marking on part part 2740

The balance channel has the numbers 2740 imprinted vertically on the back of the channel. Then BS1 or BSI below the zero of the numbers imprinted horizontally. The channel is 28 inches long and 1/2 inch wide. Let me know if you need more photos. Thank you!! Julia Harding

No name just:series 2000 SH AAMA/NWWDA 101/i.s 297 H-R40-47x71 Mfg. codeAWT-1 House built 2007

Hello!I am a return customer and just needed a hand making sure I order the correct part. The channel width is a little over 1/2", channel length is 28" and in looking at the pictures on your site I wasn't sure if my part is the 350 or 390? Ive attached photos of the ends and please note that the b ... (cont.)

Size 28"

Hello, I need replacement for a 28" window channel balance. Stamped marking is BSI 27400 or the last letter might be a Q, 2740Q. Thx

Internal part broken - looking for repair/replacement. See 3 pics. Metal guide 28" Thank you form any help! Kevin

Need replacement block and tackle window balance. Part number 2730. Guides are non-winged style. Width is 1/2"

Think it's the S351-28 ? Thanks

Hi - we have several older aluminum windows in the house that need replacement balances. The first one has "b A2830" on the side, the other just has "2830" on it. I've attached pics of what the tops and bottoms look like. Thanks for nay help, I've struggled to figure out the exact replacement balan ... (cont.)

Hello, I need to find a part number for my window ballance. Length 28 inches

Hi,I'm am not sure what channel balances to order. I have attached photo's of existing balances. The only markings I can find are 27 14L BSI RO. These are for very heavy window's, I would guess the are about 45#'s each non tilting.Will a S390-28 with the 2780 option work?Thanks,Tom ... (cont.)

I HAVE 11 WINDOWS IN NEED OF REPAIRS

I am looking to replace the broken channel balances on our windows. The metal balance is approximately 28" long and 5/8' wide with a total length of 29" with the plastic attachments on the ends. The only markings I see are the numbers 2730 with the letters BSI and CH to the right of them. The wind ... (cont.)

Hello, I need to replace channel balances for 2 non-tilt windows (only up and down) so I believe I need 4 channel balances. All four current balances are broken. I see they are labeled as 27C. I was hoping you could have a look at my photos and direct me to the correct replacement product on your w ... (cont.)