Viewing all customer Discussions for:

21-022 Bifold Door Guide Pin, Float-Away

hello I'd like to refresh tired 50 years old metal bi-folds. Could you help me identify the parts shown in the attached pictures? Pictures are top left, top right, bottom right and left. I'd like to replace top and bottom tracks as well. thank you

Without the plastic parts keeping the sliding pins off the bottom (or top) of the rails, the doors stop a the screw heads in the rails and this keeps them from fully closing. It also makes it very difficult to open the doors. Besides the label, there's a ink stamp of "Aug 22 1978" on the inside of ... (cont.)

Looking for a replacement part for old metal bi fold doors. Building was built in 1969. Doors are very tall 92 or 93 inches.

Hello, I'm trying to identify the parts I need for my mirrored bifold doors. I ordered what I thought were the right parts from your firm (item shown on the right in the photo), but it doesn't appear to be the right thing. My part is on the left; your part is shorter than mine and has some plast ... (cont.)

Hi there, Haven't found this part in our local hardware stores, so hope you can help me identify it and get a replacement. It is a spring-loaded post that goes on the top of the door. Thanks.

Hi, So the spring broke on two of my door mechanisms. I sent a pic of the broken one and non broken one. Do you have anything similar that might work? Thanks so much. Toby

The pins measure one quarter inch in diameter, the plastic that fits the ends measures 3/8 of an inch . the sticker on one of the doors says FLOAT AWAY DOOR COMPANY of Georgia . I need top to bottom hardware.. four per door, four top , four bottom , eight per set of doors, two sets of doors eight b ... (cont.)

Could someone help me to identify the right size. It is a right side closet door.

I'm attaching a picture of folding closet door parts that I am in need of. In the picture I'm holding three different pins. I will number the 1-3. #1- has a white plastic cap with a spring. #2- is threaded with the insert to go in the door. #3- is just a pin with the insert to go in the door which i ... (cont.)

I need new 2 top and 2 bottom pivot brackets for my doors. I also need 2 top and 2 bottom pivot pins that will fit the brackets. I prefer not to remove the track but can if necessary. No manufacturer but cardboard glued to inside bottom of doors and one caution arrow. Please advise. Thanks ... (cont.)

The length is 5 1/2 inches including the plastic cap and metal hexagonal base. There are no markings. Will send more detailed pics if needed.

This is a metal bifold door, its 30" wide. Hoping to find the pictured track for a couple of extra doors I need to installed. Thank you.

Hi. I'm looking for a replacement pin for an older metal bifold door. The attached picture is the pin that is broken and keeps getting stuck in the channel. The pin length is 5", cap is 3/8" diameter, pin seems to be 1/4" diameter. Thank you for any help you can provide.

I need a replacement track for an old set of mirror bifold doors. The guide at the bottom of the door measures almost 7/16" wide. The door set is 4' wide. I have included a picture of the bottom guide, the top track, and the label on the door. Contractors Wardrobe only attached the mirror to someone ... (cont.)

It appears my Float Away metal bifold door hardware matches product codes: 21-022, 21-023, 21-024. However, is there a different part for the bottom guide pin... or are you to purchase (2) of part code # 21-022 (one for top; other for bottom)? Thx Pam

My name is Don The team member I talked to was Steve. Need lower pin for 2 panel metal door. The lower pivot pin (with nut seems to work). Company part fron Float Away. Float Away - Home Products Inc

I can't find and markings on my four closet doors or the hardware. Can you identify these?

I am trying to fine the correct pins for a Flow Away ,steel ,mirrored ,bi fold closet door. The doors have two different types of pin holders. Most of the doors that work have white plastic bushings at the top an bottom of the steel door with some kind of black plastic for adjusting. These seem f ... (cont.)

Hi, What are the part numbers needed for the top and bottom pivots for steel bifold doors?

Hi, We just bought a foreclosed house and one of the bifold closet door is missing the bottom pivot pin. I would like to verify if the following parts are the right parts to replace/fix this closet door. Bifold Door Guide Pin, Float-A-Way 21-022 Bifold Door Bottom Pivot Pin, Float-A-Way ... (cont.)