Viewing all customer Discussions for:

21-065 Bifold Door Top Pivot and Guide Pin, Fenestra

For Fenestra Incorporated metal closet door. 4" L X 5/16" W Need 1 of each photo.

Hello, we recently took this metal closet door down to paint it and misplaced the parts. We now need all 4 pins - top and bottom. Any chance you can help me identify the parts that will work? The old pins were 4 inches long.

I need spring loaded hardware for bifold metal 1970s closet doors

Looking for the correct top pivot for old metal closet door. Please see pic. All I know is it's a "Fenestra" part but not quite sure what to purchase? Can you help? Also, what would be the corresponding bottom piece? Thank you

here is my problem. i have 40 year old metal bi-fold doors in all the closets. they are bolted together so they swing open like a regular door, so i don't use the pins on the mating edge of the doors, only the outside edge. on one door only, i can use the slot on the bottom pin and raise the door ... (cont.)

5 1/2 inch on the guide pins, 5/16 thick metal 3/8 thick plastic sleeve 6 inch long pivot pin. 3/8 thick plastic collar and 1/4 inch thick metal pin

Can you please provide a list of replacement parts to renew these U.S. Plywood Bi-Fold doors? Thanks!

I have these really old bifold doors and need parts. Unfortunately, I've no idea of the brand or model. I'm looking to buy the upper and lower pins for the open side of the doors; I've attached pics of the parts I need, as well as the inside of the door. I see some similar parts on your site but wou ... (cont.)

Our contractor accidentally tossed the lower track for our bi-fold doors. Help!

Do you have this? Need spring and top and botton caps

cant seem to locate these anywhere.

Please help me identify the attached bottom pivot. 3/8 pin cap,1/4 possibly 5/16 hard to tell threaded shaft, 5 5/8 long. I would also like the part numbers for the speed nut and clip and the screw lock in the pic. The original pin cap had a wider base to sit on that obviously is worn and missing in ... (cont.)

My name is MonicaLooking for this bi fold door pin

Hi! Asking for help in finding replacements parts for a circa 1960s metal bi-fold closet doors in my co-op. I have 4 sets of these doors. Would love to keep them and refinish the metal to original. Call me crazy. None of the closets close properly. The bottom "pin" doesn't seem to stay in he track ... (cont.)

I need replacement bifold door pin caps, and the post is .3 or 3/10 of an inch. These have just worn out or fallen off over time. Can you help?

Hi, I'm looking for the track to rehang old Fenestra metal bifold doors. Each opening fits 2 doors. Each door measures 24 inches. So I guess I need a 4' track. Would your 4' track work with these doors and the pins pictured. Thanks for your help.

hello I am in need for pins for a complete bi-fold door and pivot clamps for them The upper pins I have are the same as 21-065. do you think that the pivot clams 21-154 will work for me

I need to replace pin caps on several bifold doors. The measurements are shown in the photo but are as follows: Pin 5/16" OD Pin length 5 1/4 inch Pin cap hub 3/8" OD Pin cap flange 1/2" OD Thank you!

I have an old Fenestra bifold door. It looks like the 21-065 in the one I need only my pin is 4 inches. The plastic guide is .375, the pin with is .30 and the length is 4, and the spring is 2inches. I need the complete assembly.

SWISCO: I'm looking for replacement part(s), assemblies for my original Fenestra metal bi-fold closet doors. The doors are originals from when my Grandparents had the home built in the late 1960s. I need part recommendations for both upper/bottom pivot assemblies, including all pin caps & push nuts ... (cont.)