Viewing all customer Discussions for:

21-149 5/16" Grommet, Peachtree

Trying to find the correct part for the non hinge side that runs in the track. This is a picture of what I need from another door in the house. The whole mechanism is missing from the door in question. Thanks for your help

I am trying to identify and replace parts for this make of metal bifold closet doors probably made in late 60s or earlier 70s . I have 3 closets and doors are in good shape . I would appreciate any information concerning these doors . Thank You

We have 5 metal bifold doors that are 98" tall ,our house was built in 1977 do you have replace ment pins and caps . The pins Top are 1/4" x4 and 3/4 long and bottom pins are 1/4" x 5" long. Also do you have a distributor in Canada? Thanks for you help John

I need, I believe barrel Springs, plastic clips, I need plasticcaps I'm missing the rod, plastic holding clips, I definitely need help with this project.

Hi I need to replace hardware in all 6 doors. Please help to identify what i need Thank you so much

Only one bifold in my house from 1975 has the hardware still intact. The rest are pissing guides and pieces/springs worn out and don't slide open or shut. Having trouble finding parts locally

i have a pair of 24" metal bi fold doors and based on the pics i need the following parts so i know what to order: -top pivot pin -top rolling pin -bottom pivot pin -bottom rolling pin -48" top track -48" bottom track

Hi, The following photos are of an older bi-fold door missing the lower track for reinstallation, the photos include the manufacturer, the door itself and the bottom of the door. I have a few of these doors both 24" & 36" and I'm looking for the lower replacement track for all. I believe the 36" ... (cont.)

Hello Do you have replacement hardware for this bifold door? It's super old, date on back says 1971. Neither door set had a complete set of hardware on it. They're in an old mobile home. Hoping you could help with the upper and lower pin replacements. Also not sure the tracks have the pieces they'r ... (cont.)

I need replacement floor tracks for my 1969 fold away bifold metal closet doors - still available? Do you sell a kit to refurbish the door and all the hardware?

Hi, I have three 1970s metal bifold closet doors that I'm hoping to find replacement parts for. I removed the doors to have my floors replaced and many of the parts have been broken or misplaced. I'm hoping to find replacement pins, brackets, clamps, bumpers, tracks, and anything else needed to com ... (cont.)

I ordered 21-071 and it works well. I need the fixed pin as well. What part code is that? Also I need the bottom track insert. Reminder to myself I need 21-149. Thank you in advance.

Hello- I would like to replace the hardware on my Fenestra metal closet doors. I have enclosed the pictures, which I hope demonstrate the proper dimensions. Unfortunately, I purchased 21-001, 21-007, 21-154, which are for a similar door, but do not fit mine. I was hoping you could point me to the c ... (cont.)

Good day, I purchased this "old"door to repaint and hang. Not sure whatparts are needed. I want all new ones. Can you help? I will be submitting an order for parts on a different type of door but I know what I need for that one.?

I need a pivot pin replacement since the spring is missing. I have included a photo of the inoperable pin and one that is working. It appears the spring is missing as well as the retaining washer. I have also included a photo of all the markings on the door. Thanks.

bifold door bottom pivot assembly including the two almost square plastic pieces to hold the rod and spring with the lock and top plastic head. have added the photo of the other one thats working. need the same set. appreciate your help !!!thanks

Posts are are 4.5" long and 1/4" at the top where the cap goes and 5/16" on the rest of the post body where it goes through the nylon guide bushings. All of the springs are good. It is the nylon guide bushings and caps that I need. Nylon caps fit on 1/4" dia Nylon guide bushings have 5/16" dia ho ... (cont.)