Viewing all customer Discussions for:

21-277 Bifold Track Bumper

Customer Service, one (1) pin on the lower section failed on this set of doors. It is time to replace a door pins, springs, elastomers and tray/guide parts.could you kindly provide the Part Numbers to replace all of the hardware? The steel doors remain in good condition. Thank you.dwight ... (cont.)

Can u tell me what i need for this door to replace because it is horrible. Do you have any person who can install ?

would like the correct pins for replacement on the hinge and guids

Picked up eight (four 14 3/4, four 11 3/4) Benchmark bi-fold doors at a salvage yard.They seem to be in excellent condition, aside from one missing spring, I think all the door specific hardware is intact. I need everything else to install the doors in a pair of 108 inch openings. Not sure if this ... (cont.)

Looking for replacement bushings

I need the bottom track for a 2ft wide door and the bottom pins.

Please let me know which patr number is match to in my picture 1 part i found in your part picture your part number is 21-007 match with my part onather 2 part please let me know your part number This is three pieces 1. Top 2. botam. & in middle part is base sockets.

I need replacement pins, which part would I need? The pins it has now are 5 1/4 in long and 5/16 in diameter. Also if I decided I wanted to replace the tracks which type would I need for the top and bottom?

I'm looking for hardware for old metal bifold doors.

Need to find floor track and top pin for 3 bifold doors

Dear Support Team at Swico. If you can please help me identify the elements needed. I would like to replace the following hardware for some old metal bifold doors. I would need the bottom and top pins. I also need to stopper in the middle and would like to replace the old floor aluminum rack (extre ... (cont.)

Hi there. We have these beautiful, original metal bi-fold doors that were an issue since we bought our house 5 years ago and I have been trying so hard to find updated hardware so that they not only look sharp but function. From watching your videos online I'm almost positive that I need your 21-007 ... (cont.)

Customer needs metal bifold doors rebuilt to close properly

Need 12 pin caps for all the bifold doors in the house

I'm looking for a bottom track for a bifold metal mirrored closet door. I recently got the guide pin 21-007. This is the track that goes into. The pin fits the door perfect but it rubs on the sides of track. Thank you.

Looking for parts for 80s slimfold doors please help... bottom track pins etc Here are some more pictures of what I need. Thanks

My name is Roy, I have 12 old metal bifold doors that needs new guide pins, springs on the top and bottom. Here is the door that I need part for please lmk thank you These doors are about 50 years old and all needing replacement. Thank You Roy

Looking for replacement hardware and diagrams for 1960s steel bifold closet doors

Looking for a aluminum bifold door track with the following specs length :36" with: 1" depth: 1/2"

Please contact me regarding replacement parts