Viewing all customer Discussions for:

21-277 Bifold Track Bumper

5/8" pincap diameter

Hi, Do you have any suggestions for a new track & pin system to work with existing Leigh bifold doors? My neighbors keep getting rid of their doors and not putting out the tracks with them! I painted one set and had something that kinda worked, but with limited bottom supports and the disk tops a ... (cont.)

The doors measure 35-1/2"W X 93-1/2"T each. There are 2 doors.The pin diameter is.317" diameter.I need all the hardware for all 4 corners of the doors.Some of the bolts seam large and may have been added by previous owner.The top and bottom tracks are fine.Feel free to call.Pat

Can you help me find parts?

I have Benchmark metal bifold closet doors. I need the Primeline part from Lowes that's part number 795884. A Swisco person said I should start with the 21-044 and I think that's a good match. But he would not give me all of the parts I need. I need all of the parts I need to install my door. ... (cont.)

i have a pair of 24" metal bi fold doors and based on the pics i need the following parts so i know what to order: -top pivot pin -top rolling pin -bottom pivot pin -bottom rolling pin -48" top track -48" bottom track

Hello, I am looking to replace the tracks (currently they are the same profile top and bottom) with a new low profile top track and floor pivot without the track. I am looking for the top track to be a silver or white finish. Do you have a kit or list of parts that would appear to work? The opening ... (cont.)

Hi, The following photos are of an older bi-fold door missing the lower track for reinstallation, the photos include the manufacturer, the door itself and the bottom of the door. I have a few of these doors both 24" & 36" and I'm looking for the lower replacement track for all. I believe the 36" ... (cont.)

hi there, i have two different types of floor to ceiling old metal closet doors. i need to install them but i'm unsure which pieces they both need. i redid the floors so i'd love to have them only need a track on the top if possible. the height is about 94" tall and the width of each closet is aroun ... (cont.)

Hardware for my bifold doors Not sure if I need anything else or do I just put these in place?

Hello, I would like to replace these pins on this closet. I want to make sure I am getting the right ones. I have watched the video. Could you please confirm for me the right pins. I need the pin at the bottom for sure. The top pins seem to be fine but would like to purchase backups. Thank you Ang ... (cont.)

need help identifying this part

Our contractor accidentally tossed the lower track for our bi-fold doors. Help!

I'm looking for track and the name of the part the bifold door pin sits in. The female portion that sits in the track.

I own several condos in a condo complex that all have metal bi-fold closet doors. Many of the guide rods are missing at the top and bottom. I'd like to replace all the ones that are missing and purchase a few more to keep if anymore should go missing. I'm not sure which rods for either the top or bo ... (cont.)

First picture is the top track. Second picture is a different bifold closet door to show the bottom tracks installed in other closets in the house. The doors and tracks are probably 40 years old. Track is not available to look for name or numbers. It is 48 inch length. The picture is of a similar ... (cont.)

My dad custom built these mirrored bifold closet doors in the early-mid 80s. I thought I repaired them but if I'm being honest, it was probably a temporary fix. It seems like the tracks (bottom/top) themselves are probably fine. However, I could see a new bumper-- at least on the bottom track and d ... (cont.)

Looking for 3/8 ID nylon bushings for 3/8 OD pins for top of door to guide door in track

Hello, I am looking for replacement parts for closet doors which I had to remove for a construction project. I would prefer if there is an easier pin to use than the ones I have in the pictures. Also there is a stopping block in the bottom rail that is missing and I would like to replace it and th ... (cont.)

Hello Do you have replacement hardware for this bifold door? It's super old, date on back says 1971. Neither door set had a complete set of hardware on it. They're in an old mobile home. Hoping you could help with the upper and lower pin replacements. Also not sure the tracks have the pieces they'r ... (cont.)