Viewing all customer Discussions for:

23-041 Mirror Wardrobe Door Roller Assembly

We have 3 mirror wardrobe doors on our bedroom closet and while cleaning the door bottom rollers, we noticed this plastic track guide missing on the middle door.(see photo of roller part and plastic guide) We had to replace the middle door a couple years after it was broken by a teenager. We're as ... (cont.)

Top black rollers seem to be hard plastic that has broken off pieces. I believe serial #is us Pat 3750337 . Also sent pic of bottom rollers not broken but think good idea to replace them. Identifying number on it looks like 4212 Thanks for your help! Linda

Installing doors that are 20+ years old. The section that extends is stuck on several. It will move around slightly but will not go out. Is there a trick I'm missing? One so far will skid out freely as it z should.

Need to find this parts for a wardrobe doors

Hello. I have two 30x79 mirror closet door however when it was removed from another closet the tracks were discarded. Could you please let me know if you have anything that will work based on the attached pictures. I couldn't find the manufacturer or anything that resembles it on the internet. Y ... (cont.)

Hello, we are in the middle of a house remodel and took our Stanley mirror siding doors off and somehow lost or threw away the bottom track. We're looking to buy a new one so we can keep the doors. I uploaded a picture of the bottom track, a picture of the bottom roller and a picture of the sticker ... (cont.)

We are renovating our house and someone tossed the lower track to our closest. We have a bypass sliding mirror door with a total width of 71in. Can you help with what track would be good, as well as if we need to buy new rollers at all? Thank you

ACME 4011; US Patent 3.058.173 This is the information we can find on the existing unit. It is on mirrored door from company called Stegbar in NSW Australia. We are needing to replace this unit can you please advise if available and cost to Australia.

I'm looking to replace the our sliding closet door rollers and guides. We have 4 mirrored doors floor to ceiling height and 36 1/2" wide. Some are ceased. I would also require the matching track to go withe the new rollers, the closet width for track length is 144". Can I get parts in Canada. Thanks ... (cont.)

HI, I'D LIKE TO BUY REPLACEMENT FIXTURES FOR THE BOTTOM AND TOP OF MY CLOSET SLIDING MIRROR DOORS. CAN YOU IDENTIFY THESE AND HELP ME? THANKS

Look to see what roller to replace with. Also what track to replace this with.

Ik wil graag zelf deze foto

Hi I hope you can help me. I am looking for a Stanley closet slider GB232166. It is Grey and has a blue knob on the inside. The wheel is broken and not working properly.

I need a 59 Inch track for Convex roller Swisco part # 23-041. My mirrored door is 59 Inches and you only have that size for the Concave. If I bought the 60 inch are a bigger size can you cut it for me. If not what is the best way to cut these tracks down to size. Thanks,

Hello. I need four each of the items pictured. Rollers on the floor and just guides on top. The top are not wheels, but rectangular rubber pieces. What happened is one of the rollers no longer turns and I lost one of the guides on top so I figured I'd just replace them all

What is the size of the 23-041. Height? Width? Thank you.

This is a bottom roller.

This is a bottom roller.

I have a broken wheel and I want to replace this. Do I need to purchase two of them?

Do you have a bottom roller replacement part for picture. Top C to C horizontal holes = 2.5". Side C to C vertical holes 2.75". The roller diameter is 1 9/16"